Sorry guys, I'm a FNG and don't know how to reset the throttle, I've searched for hours trying to find the procedure without any luck. Thanks!

 

Just type throttle reset in the search box at the top of the page. The info is there.

 

Keep the key in for the entire process.

1) Turn the key to the on position, the position just before the starter turns over.

2) Press the gas pedal firmly to the floor with the key in the "on" position.

3) Hold the pedal to the floor for five seconds, then turn the key back to the "off" position (don't remove the key), then release the gas pedal.

4) Wait 2 mins. for a full reset

Summary: Key on, pedal down 5 sec, key off, pedal up, wait 2 minutes.


If this doesn't work, disconnect your neg. battery cable for 20 minutes.
This will re-set the parameters in the drive-by-wire

 

Ya Bill I tried that, and all kinds of other search choices,


Thanks Valk, I made the thread title to help others in the future..


Walt

 

I'm glad Valk posted it for you. This is what I found when I was searching for it, but it was also in my owners manual. It works great. You have to do it periodically. I put a sprint booster on mine so I don't have the lag. Even though I still do a throttle reset. Enjoy.

Throttle Body Reset? - CrossfireForum.org