I have been to just about every mopar site and I actually work for a chrysler dealership. I can not find a wire harness for oem fog lights anywhere. Any suggestions

 

I'd be interested in that too.

 

I have not seen one either and have pretty much decided I will need to make my own. the nice part is that the switch is foglight ready and all you need to do is put a fuse in and hook to the right pin on the switch, the indicator even works like it is supposed to.
I don't know if you have found them, but there are a few threads about putting foglights into Base models.

 

Thanks RickZ

 

I had a right side fog light out, and rather than have the dealer take care of it ,I went exploring I pulled the lower cover,( behind the fog light) off and started tracing the loom. Single line, I had to pull the liner behind the tire and reach in to trace the loom , running my fingers along the wiring I found somthing that didn't feel right , and it was a broken connection/wire. It was a SOB to install an in-line splice,due to my bad back and the just out of reach location, but I did it and not the dealer Back to the thread ,yes the fog light wiring diagram is missing!!!!