I have been thinking of removing the CROSSFIRE letters from the hatch.
I would like to have the positions of each letter in case I decide to reapply them.
These are the sizes for a 2004 Coupe, Later models are located farther up from the hatch lip. The other sizes are within 1/16", rounded to the nearest 1/8".
InfernoRedXfire has informed me that the 1.00" dimension is 1 15/16" (1.94") on the SRT's. This is to allow for the SRT-6 badge.
The letters are vertical, but follow the profile of the hatch lip, which is 5/16-3/8" lower in the center.
The letters are .73" high.

 

My letters are 1 15/16" or 1.9375" from the bottom lip on my SRT roadster.

 

If I would ever remove mine, then want them put back on, I would just buy new, already spaced and set to go. Very easy.

James

 

Thanks, I'll add that to the sizes.

 

I'm cheap, not easy, but cheap none the less.

 

I understand where you are coming from, but we are talking CROSSFIRE here!

I see it as too much hassle to properly apply new adhesive and get every letter standing PERFECTLY straight upwards with no lean.

James

 

I am a metric man and finding these measurements hard to follow also how far apart is each letter from the next? I have a 2006 xfire by the way thanks

 

The 1" dimension from the bottom is to the bottom of the bar that is on all the letters.
The 1" dimension is for the 2004 Crossfires and all the others have a 1.94" dimension. This allowed for the SRT label to go beneath it.

 

Thanks 180. This is really appreciated. I cannot buy a new set because Chrysler is no longer making them and no seems to have NOS on ebay

 

Where in AZ are you? If near you can measure mine.