Headlight not adjusting...
while i was installing hid lights i was trying to adjust the passenger side light by twisting the screw and it would not adjust at all. I adjusted the driver side one with no problems, i was wondering if there something i can do to try to get it working again, it turns left and right but nothing happens
Thanks
Thanks
Thanks ill give it a try, i did turn it for quite a while and it still didnt do anything. I did notice it was a bit harder to turn then the other headlight
I have a spare headlight I got off the shelf and took some pics. It does appear that the adjustment shaft (with threads) must have a ball end on it. It appears that it slips inside the white piece of plastic in the pic.
I would try, as suggested to turn the **** in as far as it will go. But first try to get a mirror in there and see what is going on. Before you wind it in, you may want to be sure the ball end is lined up in the plastic proplerly or you may break it.
I would try, as suggested to turn the **** in as far as it will go. But first try to get a mirror in there and see what is going on. Before you wind it in, you may want to be sure the ball end is lined up in the plastic proplerly or you may break it.
Ok, here is a better pic with a larger mirror. I turned the adjustment in 5 turns before it stopped, to get a better shot of what you need to look at.
Last edited by James1549; Sep 25, 2011 at 10:07 PM.
Ok just to clarrify that whit plastic peice is on the inside where the thread screws into right ? that isnt the the same plastic piece that you can turn with you hand? sorry I cant picture what i need to be looking at right now, ill check tomorrow and report back
Last edited by Pat13; Sep 25, 2011 at 10:30 PM.
Originally Posted by Pat13
while i was installing hid lights i was trying to adjust the passenger side light by twisting the screw and it would not adjust at all. I adjusted the driver side one with no problems, i was wondering if there something i can do to try to get it working again, it turns left and right but nothing happens
Thanks
Thanks
Originally Posted by Pat13
Ok just to clarrify that whit plastic peice is on the inside where the thread screws into right ? that isnt the the same plastic piece that you can turn with you hand? sorry I cant picture what i need to be looking at right now, ill check tomorrow and report back
Thanks for the help, it works fine now and its adjusted right. I got a bad set of hid's and I tried to adjust them thinking it would help, it didnt. Today I bought hid simuators which I must say are really nice, the bulbs had blue film on them but the light is white, im extremely happy with them
Thread
Thread Starter
Forum
Replies
Last Post
Franc Rauscher
Troubleshooting & Technical Questions & Modifications
14
May 9, 2016 12:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



