Removing/replacing OEM Chrysler badges?
Removing/replacing OEM Chrysler badges?
Hey everyone. I recently purchased a set of new OEM Chrysler badges to replace the heavily faded ones that came on the car upon purchasing it. I looked at some aftermarket options/overlays but I wasn't sold on any of them and decided that i'd rather simply get new OEM badges.
Anywho, the badges recently came in the mail and i'm just wondering if anyone has replaced these before and if so what the easiest way to do it is? My biggest concern is damaging the chrome wings. My best guess was to use a metal "pick" tool to pop them out. Also, does anyone know how these badges are affixed? (glue, double sided ahesive, clip?)
Any/all feedback is greatly appreciated! Also, below is a picture of the badges I am referring to.
20140317_124800_zps7a16b7ca.jpg
Anywho, the badges recently came in the mail and i'm just wondering if anyone has replaced these before and if so what the easiest way to do it is? My biggest concern is damaging the chrome wings. My best guess was to use a metal "pick" tool to pop them out. Also, does anyone know how these badges are affixed? (glue, double sided ahesive, clip?)
Any/all feedback is greatly appreciated! Also, below is a picture of the badges I am referring to.
20140317_124800_zps7a16b7ca.jpg
Re: Removing/replacing OEM Chrysler badges?
I'm not sure. I can check the little bags they came in when I get home to see if there is a part number. I actually stumbled across these on Amazon after a Google search directed me there. I couldn't find them on any of the OEM Chrysler parts websites. The only thing I could find was the entire wing badge assembly which I would guess also includes the emblem itself. But needless to say I didn't want to shell out a ton of money for the entire assmembly when I only needed the badges. When I purchased them on Amazon they were the only two left in stock.
Re: Removing/replacing OEM Chrysler badges?
My rear hatch is already de-badged (removed the Crossfire letters & SRT-6 badge). I'm just talking specifically about the Chrysler badges. Did you also use dental floss to pop those badges out of the chrome wings?
Re: Removing/replacing OEM Chrysler badges?
~ they are most likely held on by a rubberized glue type product from the factory.
i would try to remove the main wings themselves and determine if there is a small hole or two on the backside to press the chrysler badge out versus prying it out from the front side. heating up the badge will also aid in the removal or breakdown of the adhesive... hope this help.
i would try to remove the main wings themselves and determine if there is a small hole or two on the backside to press the chrysler badge out versus prying it out from the front side. heating up the badge will also aid in the removal or breakdown of the adhesive... hope this help.
Re: Removing/replacing OEM Chrysler badges?
No HF, just the ones attached with tape. Work it like a saw, comes right off.
Re: Removing/replacing OEM Chrysler badges?
I've already removed the "Crossfire" & "SRT-6" badges. As far as shaving badges goes, that's easy peasey. I'm just looking for an easy way to remove the oval Chrysler badges from the chrome wings without damaging them. But thanks for yours input regardless.
Re: Removing/replacing OEM Chrysler badges?
Also it's worth adding that the Chrysler badge can be removed from the wing emblem whereas the rear badge cannot. In other words, you can replace just the Chrysler oval up front whereas in the rear you have to replace the whole assembly (wing emblem + Chrysler oval).
Re: Removing/replacing OEM Chrysler badges?
so you are telling me that I can replace both emblems front and back with the same that are used for the Chrysler 300 2010??? This is easy to find.
Thread
Thread Starter
Forum
Replies
Last Post
mattnelson71
WTB - Items/Parts Wanted to Buy - Archive
5
07-28-2015 08:59 PM
leaddog2015
WTB - Items/Parts Wanted to Buy - Archive
0
07-24-2015 10:13 PM
cjfine
Parts/Accessories for sale - Archive
0
07-20-2015 11:58 PM
tom2112
Parts/Accessories for sale - Archive
7
07-08-2015 08:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)