sprayer onto windshield plugged
Re: sprayer onto windshield plugged
there are a couple of threads here that might be helpful in solving your problem if you have already tried to clear the nozzles with a thin piece of wire or something similar. that is the place to start. after that, just search the forum for "nozzle" or "washer" or something related to the item.
Re: sprayer onto windshield plugged
Pump some fluid through the hoses before putting the nozzle back in position, this will clear the hoses of any more potential blockage.
The following users liked this post:
fyrepower (07-15-2022)
Re: sprayer onto windshield plugged
I am getting ready to replace my washer reservoir and pump because of slime build up. So if I remove the nozzle housing and the nozzle I would then be able to use compressed air and blow it through the hoses?
Re: sprayer onto windshield plugged
I would pull pretty easy on the trigger.
Re: sprayer onto windshield plugged
Yes, that trick / fix works 99% of the time, on any car. Also a good way to adjust the aim of the spray, as the nozzle does usually offer a little directional movement.
Re: sprayer onto windshield plugged
Thanks
Re: sprayer onto windshield plugged
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)