I would like to find some for my Srt

 

made my own,,cost less than $30.00 and then painted the pass side so they match, jim
crossfireAFRgaugeandpillerpod006.jpg picture by amx1397 - Photobucket
crossfireAFRgaugeandpillerpod004.jpg picture by amx1397 - Photobucket
crossfireAFRgaugeandpillerpod006.jpg picture by amx1397 - Photobucket
crossfireAFRgaugeandpillerpod005.jpg picture by amx1397 - Photobucket

 

How exactly did you go about making them? they look great!

 

I didnt make my own.... and then had the console painted to match....



(sorry, JR Industries dosent make them anymore)

 

That sucks! They look awesome!

 

this could be a long story,
I am the delevery guy for a car performance store, D T performance & wheels.. so we have about 10 to 12 universal pods, some single ,some double and some triple, i only wanted a double, we had 4 or 5 double ones for honda, ford and toyota. first i tried each one to see how it would fit on my piller molding,,they didn't. but there was one that had a little of a square side,, ,i got out the heat gun, and a 2x4 and started to shape it,, had to go up to a 4x4 to get the one side to fit snug. it took me about an hour to heat ,form and fit, don't forget you can't just shove it over the stock trim you could cut ,scratch or damage the stock trim in a way that you don't want to. then holding it in place ,you got to put it on the car so as not to have it sticking out the window, we have these little short 1/4" black screws that work great,the plastic push screws(fasteners) will not work because they pull out too easly, so once i got it formed good enough while i held it in place, another guy screwed it to the factory trim,, then once all that is done ,I had to cut a hole in the back so the wires, plugs and hoses could all come through to the gauges,, before the final install i painted both black with interior paint, so both sides would look alike, hope this helped. jim---------------------- cost $30.00

 

I want that!!!!!!!!!!!!!!!!!!!

 

I'm not sure if I trust myself enough to do that Haha

 

https://www.crossfireforum.org/forum...illar-pod.html

here I made mine with gauges for under $100 bucks...pics and instructions

Pooly

 

As soon as I get them primed ready to paint, I will have a set of pods, the original JR Industries pods that is, for sale along with the gauges. They are just like Mike's. The gauges came with them when I bought them, can't warranty the guages or tell you much about them, but the pods are in great shape, and will come primed ready to paint. I have $300 in them...both sides just like Mike's setup.

 

What exactly did you mean by both sides?

 

you get the pods for the driver's pillar, and a plain pillar for the passenger side so you can paint them to match...thus, both sides...

 

Hey that's a good idea! duhh! sorry I'm a little slow after work

 

srt666 If you replace the d/side,Id be interested in buying the stock one from you

Pooly

 

I have no clue how much there going for but just make an offer.

 

If I remember, mopar accessories had them for sale once for around 20 bucks but I couldnt get an accurate response from them which part number was for the d/s. would $10 plus shipping to 03878 (NH) work for you?

PM me please