if you want to delete your rear cats ,, and be able to put them back when you want then you should see what i made .. you can clamp them on or weld them on .. pm me for instructions,, i will sell this set for 125.00 + 12 shipping, the sound is pronounce but not loud just right. jim " note you have to call them test pipes because no one is suppose to remove them and they are a test pipe to run off road LOL.

 

Are these still available?
I would take them if they are just a easy replacment but what about the sensors? Aren't there sensors on them?
Mike

 

Im looking to remove rear cats on my N/A 3.2. Will these work? Also, I have a magnaflow cat back on the way. Is there going to be drone or rasp if I remove the rears? I just want free flowing exhaust for just a little bit of coin.

 

No sensors on the rear cats. Only on the fronts.

 

Four year plus old post, but the correct answer.
Montana sold his Crossfire I guess.

 

I am looking to score a test pipe from somewhere. I suppose I can have one made at the local muffler shop. It would be cool if we had some pre fabbed for the guys here that track their cars.

 

What should I expect to pay to have a muffler shop build me this set up?

 

I had a stainless steel straight pipe from the "Y" to the tip fabbed including welded mid hanger and the flange at a local muffler shop for about $125 several years ago.

 

I had made up 3 sets of the rear cat delete pipes used one on my car sold the other two the problem is to get a muffler shop to remove the cats,,you see it is a $5000 fine if they get caught doing it ,,,so you have to cut them off in front of the cat and unbolt them after the cat then a muffler shop can make and install a pipe. good luck,, $120 is about what you will pay. jim

note: look at the pic and you will see about where to cut.

 

You're looking for the NeedsWings cat-delete down pipes friend. Performance auto parts & aftermarket auto accessories for your car, specializing SRT4, Crossfire SRT6, SLK32, C32 AMG, VR-4