I love the XF, but it's time to move on. Below are the parts I'm selling as of today:

- Bolt-on 365mm Black Series 2-piece rotors and brackets - Rotors are fairly worn but measure 30.58mm and 30.39mm. - $450 (sold to Mr. Newton, shipped on 3/29)
- Bolt-on 345mm front rotors and Brembo six piston calipers - rear 330 rotors and Brembo 4 piston calipers - Pads and rotors are like new - $1,900 (sold to TommyT, shipped on 3/29 )
- Needswings Sheet Metal Manifolds - $800 shipped (they have been repaired with JB Weld due to the previous owners nicks/dents/cracks from HIS install, not mine. Repairs are unoticable once installed. (sold to meh03, shipped on 3/26)
- Needswings Stainless Catless cutout downpipes - $675 ($100 down payment receivedon 3/26 - Sale Pending to goodgenes79)
- TTM 550cc injectors, front crossover, fittings, and adapters - $600
- SL55 fuel pump - $175 (stripped the threads on one stud during removal)
- NW Catchcan - $80 (sold to S. Artee, shipped on 3/26)
- Zex Nitrous Setup - $675 (comes with setup support)
- Needswings Coolant seperation - $50 (sold to S. Artee, shipped on 3/26)
- Latemodel Pulley Wrap Kit with all pulleys for 61/65mm pulleys - $225 (sold to S. Artee, shippped on 3/26)
- 3.27 with Wavetrac installed and TCU tune from Rudy - $1,500 - This got me consistent 4.0 second 0-60 MPH times. Less than 1,000 miles on this setup. - (sold - shipped on 3/25 - BigKid)
- Paramount Performance Stage 2 Valve Body - Paid $650 this month, will take $500 exchanged with your stock valve body.
- Needswings Single CAI - $325
- Eurocharged 61mm supercharger pulley - $300 plus stock pulley (sold - shipped on 3/24 - BCThomas)
- Cup holder cubby - $35 (sold to Red Dog - shipping on 4/2)
- Double gauge pod (painted to match the interior) - $225
- OEM SRT6 Water pump with 5K miles - $125



All prices are OBO, but keep in mind this is not a fire sale.

 

good run my friend ,keep in touch. jim

 

I appreciate that Jim. Regardless of the car I drive, I'll stick around as I enjoy this forum and members very much..

 

thanks but you know I have a tough skin,,just sorry i missed you at PB last month. keep up the good work jim

 

WOW!
Hard to believe when one of the core folks decides to go.
Speechless...

Maybe by the time you realize that you need a Crossfire back in yer life, I'll have my Turbo XF back!

Good luck my friend. Don't be a stranger.

 

Thanks, but I feel like a flash in the pan compared to you guys that have been on here for years.) However, I intend to stick around and post track results from my slow CL600 at least until it's respectable. FWIW, in full disclosure I haven't purchased or sold anything just yet.

 

Hey Grip, sorry to see you leaving. I'm interested in the Wavetrac. Sending you a PM.

 

sorry to hear that you are leaving us. Will send PM for 61mm pulley. Very much interested. Would have also bought the downpipes, but just pulled the trigger on those new. lol

 

I want those down pipes... just got to find what i can scrape together this month. cheers on the new project.

 

PM sent for the Code3 . . .

 

Ill take the single intake if it fits NA.

 

The SRT6 CAI's ( single or dual ) will NOT fit the NA.

 

Please be patient with slow responses today, as I'm on vacation. I should be able to start shipping stuff out early next week with the exception of the downpipes, valve body, and carrier. Those won't come off the car until the end of April when I get back from working in Miami.

 

Sorry to here you go. Thanks for all the help in the past. Carlo

 

I can understand, too bad you can't have both. I'm in ecstasy with my car when it's WOT or blasting around a race track. If I had to daily drive it … living with it would be a challenge. Not so much for me buy my wife would hate it and that would be the problem. I'll ponder on what you have for sale.

Les

 

I will PM you about the valve body and info in a few days....thinking about getting out myself, but if I decide different, that valve body might be interesting...

 

Update:

I'm removing the following items this weekend and will be able to ship them as soon as Monday. The parts in red have 1 or more people interested in purchasing.

- 3.27 Carrier with Wavetrac and TCU
- Nitrous Kit
- Code 3 Pulley
- NW SIngle CAI (SRT)
- TTM 550 CC Injectors, Fuel Rail, Crossover, SL55 Fuel Pump
- LateModel21 Pulley Wrap Kit
- NW Oil Catch Can
- NW Coolant Seperator
- NW Sheet Metal Manifolds

 

Don't go!!!!
Just to add I have bought parts from grip grip. He is a honest person. He sent me exactly what he said he would in a timely manner at a good price.

 

Thanks for all the kind comments, but I'm not going anywhere - I'm just selling the Crossfire.

By the way, here are some photos of the parts for sale: New Crossfire - Parting It Out Photos by wheelus928 | Photobucket

 

Did you sell the looped fuel rail? If not, do you need a stock rail?