When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
WTB: shift ****, cup holder assy, mini lower grilles, trunk pads, exhaust tips
I'm looking to buy:
-OEM 6 speed manual shift ****
-Clean and working cup holder assembly
-Small plastic front grille - passenger side or both
-Stock exhaust tips
Please message me if you have any of these and name your price. If you're not sure what I mean by the names of the parts I've posted, please don't hesitate to ask.
Last edited by McSquiggles; Jul 29, 2016 at 11:32 PM.
I've circled them in the picture of my car below. Mine is missing one and the other is disintegrating. I'm not sure if they can even be wholly removed from a parts car or not, or if anyone might have any extras. Also, is there anything that can be done about the trunk door rattle besides electrical tape?
Last edited by McSquiggles; Jul 24, 2016 at 11:02 AM.
I've circled them in the picture of my car below. Mine is missing one and the other is disintegrating. I'm not sure if they can even be wholly removed from a parts car or not, or if anyone might have any extras. Also, is there anything that can be done about the trunk door rattle besides electrical tape?
You are looking at one side of self adhesive velcro. It is not from the factory but added to help prevent rattles from the hatch. I replace mine every couple years and it makes a difference.
Remove the old velcro, clean off all the glue and apply new. Be sure to line it up properly with the hatch.
You are looking at one side of self adhesive velcro. It is not from the factory but added to help prevent rattles from the hatch. I replace mine every couple years and it makes a difference.
Remove the old velcro, clean off all the glue and apply new. Be sure to line it up properly with the hatch.
When I had my '04 I tried putting a sticky pad there to prevent abrasion of the paint, slowly it was pushed downward by the hatch closing on it.
I had much more success when I put the pad on the bumper on the hatch itself, it seemed that the ridges in the bumper held it in place much better. It is much less noticeable on the hatch, an added bonus.
My '05 has a clear plastic sticker on the body, this sticker has not moved although it is lifting at the edges. I thought this was a factory addition, either way I would like to know where I can get two more for when they finally fail.
Save
Last edited by onehundred80; Jul 24, 2016 at 05:09 PM.
WTB: shift ****, cup holder assy, mini lower grilles, trunk pads, exhaust tips
