CTC Guys - brake installation...
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 1,325
Likes: 0
From: Bayou Vista, TX
CTC Guys - brake installation...
Hey guys,
Just did the front and rear Rotex brake pad installation on the SRT. It takes me about 30 mins/side for front and rear.
The front is 2 bolt covers that snap on, 2 bolts (torx size 40 on SRT, Allen head on Non-SRT), one retaining clip, and a little bit of prying to slide the caliper off. You may need to compress the piston(s) on the caliper to get the new pads on depending on how many miles and how worn your existing pads are.
The rear is two sliding pins held in by tension - you don't even have to remove the caliper.
Pretty simple job - if anyone decides to do it, let me know if you'd like some help.
Will reply later about break dust - I know Roy seems to like his!
SQ
Just did the front and rear Rotex brake pad installation on the SRT. It takes me about 30 mins/side for front and rear.
The front is 2 bolt covers that snap on, 2 bolts (torx size 40 on SRT, Allen head on Non-SRT), one retaining clip, and a little bit of prying to slide the caliper off. You may need to compress the piston(s) on the caliper to get the new pads on depending on how many miles and how worn your existing pads are.
The rear is two sliding pins held in by tension - you don't even have to remove the caliper.
Pretty simple job - if anyone decides to do it, let me know if you'd like some help.
Will reply later about break dust - I know Roy seems to like his!
SQ
Thread
Thread Starter
Forum
Replies
Last Post
Roty135
Wheels, Brakes, Tires and Suspension
17
Oct 11, 2018 10:11 AM
xfClifford
Troubleshooting & Technical Questions & Modifications
27
Nov 10, 2015 10:08 PM
Romio
Parts/Accessories for sale - Archive
2
Jul 24, 2015 07:04 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
