Which company offers the best ECU flash?

I would appreciate any input from anybody who has had personal experience with more than one company's reflash.

Also, If I later get a pulley, do I need to re-reflash my ECU, and would it be best to upgrade the injectors as well?

Thanks

 

I have done quite a bit of work with inmotion in Oregon they are very customer service conscience.
I have had them do the same ECU several timess till I got the power band I was after and they did them at no additional charge.
You should have your ECU re-flashed whenever you change anything as drastic as a Crank pulley. Injectors, No. What you have stock can handle quite a bit of modification.
Mike

 

can you pass along the ph# address of in motion to me sounds like this might be somewhat local to me

 

Inmotionusa.com

Regarding what Montana Crossfire says about the injector size, do a search and see what TVT Designs have to say about the injectors (basically they are running at about 80% with a stock engine - do a few mods and you're running lean).

 

don't have the phone handy but...
InMotion Tuning
P.O.Box 2066 Clackamas, Or. 97015

 

Here's their website with phone number.

http://www.inmotionusa.com/

503-608-7717

 

I see that people haven't learned to read yet!!!
(post #4, first line)
They obiovusly taught reading and using the 'search' function on the same day at school!!!

 

Yeah, I saw the website. Just trying to be helpful and post the link to the site plus the number off the site. That was my good deed for yesterday.

 

Go with TVT designs, he has a good ecu tune and I think he has matching injectors, I heard thier car makes 250-260 hp

 

Analogfight, I contacted InMotion about my dropping off my ECU instead of shipping. They said it was easier to just ship it to them. They make plenty of runs to Portland to pickup and arent setup up to do drop ins. I think he said they were down by Silverton(?)

MikeR

 

good to know

 

That's because even though I stand behind their work InMotion (they have done very well for me) is probably a 15 year old computer geek with pale skin, 1/2" thick glasses and a pocket protector in his mothers basement.

 

I sent my ECU to Speed Innovation and am very happy with their work, just an option for you. Here is a link to their site
http://www.speedinnovation.com/

 

Thanks, Paul.

 

Are Speed Innovation still alive?

 

When I followed that link my virus software found a virus...... just a heads-up1
THIS WAS THE MESSAGE FROM Mcafee:

"Settings\fcurley\Local Settings\Application Data\Mozilla\Firefox\Profiles\ynqqx0ux.default\Cac he\192E7665d01\00004659.js Exploit-IFrame (Trojan)"

 

I don't know why your computer says that link is a virus I just tried the link and it works fine. Sorry if something looks funny but they are or were last year a legitimate company and was the first to post before and after Dyno results.I have not talked to anyone at SI since just after I received my ECU back from them. I live in Texas and have nothing to do with them other than being a customer and I have been around this site for a long time and would not knowingly post misleading information or a link to a computer virus.

 

Paulw, I did not mean to insinuate that you would post an URL with a Virus (Trojan) attached to it on purpose. If that is the way you took this I apologize.

I just wanted to warn others that I had a problem when trying that link. When I tried it again this morning i got the same messgae from my Anti-Virus sotware.

 

Xfire2005,
No problem I did not believe that was your intent I just didn’t want anyone to think I that I might. I tried the link with Mozilla and IE with good results but I use Norton antivirus not Mcfee and unfortunately these days you can't be to careful and must have virus protection and by all means we should warn everyone if and when you find stuff like that.

 

Anti Virus Guard on my pc picking up the same Trojan