Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Starting Issue

Thread Tools
 
Old Dec 27, 2008 | 09:01 PM
  #1 (permalink)  
kamoscho's Avatar
Thread Starter
Joined: Oct 2008
Posts: 12
Likes: 0
Default Starting Issue

I have an 04 x fire and when I try and start it, it will make this very quick 1 time click sound. It sounds like it is coming from the starter, but the car will not turn over. I had my brother turn the key and I watched and out of 20 attempts the serpentine belt only turned one time! So my question is why would my car be doing this would it be a bad starter?
 
Reply
Old Dec 27, 2008 | 10:11 PM
  #2 (permalink)  
Beaner's Avatar
Senior Member
Joined: Aug 2008
Posts: 3,175
Likes: 16
From: Niagara Falls, Ontario, Canada
Default Re: Starting Issue

If the battery is charged, it could just be a bad connection at the battery or on the starter. My F150 did that twice and both times it was just the wire that went from the positive terminal to the starter. It made one loud click at the starter and thats it, everytime I tried it would only click once. Make sure connections are tight and corrosion free. I hope its that minor for you. I know replacing a starter would not be not on my wish list.
 
Reply
Old Dec 28, 2008 | 07:04 AM
  #3 (permalink)  
kingkub57's Avatar
Forum Regular
Joined: Jun 2006
Posts: 453
Likes: 1
From: St. Clair Shores Michigan
Default Re: Starting Issue

yes check your connections also make sure the battery is fully charged their has been a lot of battery problems not having enough voltage to engage the starter relay and starter, just a thought ??
 
Reply
Old Dec 28, 2008 | 07:41 AM
  #4 (permalink)  
InfernoRedXfire's Avatar
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Default Re: Starting Issue

The OEM battery needs to be replaced at 4 years old.
 
Reply
Old Dec 28, 2008 | 10:27 AM
  #5 (permalink)  
kamoscho's Avatar
Thread Starter
Joined: Oct 2008
Posts: 12
Likes: 0
Default Re: Starting Issue

I will check the connections when I get home, I just replaced the battery and I know those connections are good, but it never hurts to double check!

Thanks~!!!
Kalvin
 
Reply
Old Jan 31, 2009 | 05:10 PM
  #6 (permalink)  
kamoscho's Avatar
Thread Starter
Joined: Oct 2008
Posts: 12
Likes: 0
Default Re: Starting Issue

Ok so I finally got to it and here's what it is doing. When I put the key in the ignition I have to turn it really fast in order to get any sort of starting sound from the engine bay.
Well the starter will turn the engine, but only a little bit. I was watching as my friend turned the key and the belts turn about 2 inches each time and that is it! I checked all of my connections and they are all good!
I am wondering if a fluid is low like the tranny fluid is there a sensor that will not allow you to start the car?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KDW4Him
Troubleshooting & Technical Questions & Modifications
18
Sep 1, 2021 05:47 PM
PNA
All Crossfires
14
Nov 12, 2020 04:44 PM
northwest_crossfire
Troubleshooting & Technical Questions & Modifications
9
May 30, 2016 05:19 PM
Bayukbros
Crossfire Roadster
3
Jul 17, 2015 11:21 AM
FIXRE
Troubleshooting & Technical Questions & Modifications
3
Jul 9, 2015 09:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 10:32 AM.