ECU Tuning meet... Give me a reason to Travel
Originally Posted by TVT_DESIGN
I'm in for Canada.
Who wants to orchestrate this?
Who wants to orchestrate this?
Guest
Posts: n/a
Ok so we're starting to plan this out and I need to know the best place in Canada to set up the meet.
So far the list of stops looks like this:
Allentown, PA
Williamsport, PA
Pittsburgh, PA
Cleveland, OH
Detroit, MI
Ontario, CANADA
Those are basically the largest cities on our route.
If we have a different Canadian meeting point, maybe somewhere a little closer to the boarder, then our target cities may change.
The cities may also change depending on interest.
Ideally the least amount of stops with the most interest is what we would like to plan.
We will be offering tuning, product installs, demos, and basic knowledge of the platform.
If we could arrange these meetings around local drag or racing events that would be awesome. That way you can not only feel the difference, but see the numbers as well.
We can also opt for a dyno day in there as well if we get enough people.
Start showing me a list of interested parties please.
Also, if someone would like to recommend a different route we will be departing from Dunellen, NJ.
So far the list of stops looks like this:
Allentown, PA
Williamsport, PA
Pittsburgh, PA
Cleveland, OH
Detroit, MI
Ontario, CANADA
Those are basically the largest cities on our route.
If we have a different Canadian meeting point, maybe somewhere a little closer to the boarder, then our target cities may change.
The cities may also change depending on interest.
Ideally the least amount of stops with the most interest is what we would like to plan.
We will be offering tuning, product installs, demos, and basic knowledge of the platform.
If we could arrange these meetings around local drag or racing events that would be awesome. That way you can not only feel the difference, but see the numbers as well.
We can also opt for a dyno day in there as well if we get enough people.
Start showing me a list of interested parties please.
Also, if someone would like to recommend a different route we will be departing from Dunellen, NJ.
Well when you come to Canada or close by, I am in for a 265 kit and a throttle body. I dont mind doing a little swapping of parts in a parking lot somewhere. I will probably even put them all on the car there too!!
Originally Posted by TVT_DESIGN
Ok so we're starting to plan this out and I need to know the best place in Canada to set up the meet.
So far the list of stops looks like this:
Allentown, PA
Williamsport, PA
Pittsburgh, PA
Cleveland, OH
Detroit, MI
Ontario, CANADA
Those are basically the largest cities on our route.
If we have a different Canadian meeting point, maybe somewhere a little closer to the boarder, then our target cities may change.
The cities may also change depending on interest.
Ideally the least amount of stops with the most interest is what we would like to plan.
We will be offering tuning, product installs, demos, and basic knowledge of the platform.
If we could arrange these meetings around local drag or racing events that would be awesome. That way you can not only feel the difference, but see the numbers as well.
We can also opt for a dyno day in there as well if we get enough people.
Start showing me a list of interested parties please.
Also, if someone would like to recommend a different route we will be departing from Dunellen, NJ.
So far the list of stops looks like this:
Allentown, PA
Williamsport, PA
Pittsburgh, PA
Cleveland, OH
Detroit, MI
Ontario, CANADA
Those are basically the largest cities on our route.
If we have a different Canadian meeting point, maybe somewhere a little closer to the boarder, then our target cities may change.
The cities may also change depending on interest.
Ideally the least amount of stops with the most interest is what we would like to plan.
We will be offering tuning, product installs, demos, and basic knowledge of the platform.
If we could arrange these meetings around local drag or racing events that would be awesome. That way you can not only feel the difference, but see the numbers as well.
We can also opt for a dyno day in there as well if we get enough people.
Start showing me a list of interested parties please.
Also, if someone would like to recommend a different route we will be departing from Dunellen, NJ.
(I had better start saving for that TvT265 kit...!)
There's a track day / dyno event / show for the SRTFORUMS.com in central Ohio (West Salem, OH at Dragway 42) next month (06/13/09). I'm sure they'd love to see another vendor and get some more Crossfires in attendance. It's only $10 for show or spectators, and they're doing a dyno event nearby the day after (06/14/09 at Backstreet Performance, Medina, OH).
Check it out:
2009 Midwest SRT Nationals - SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum
Check it out:
2009 Midwest SRT Nationals - SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum
Last edited by tom2112; May 13, 2009 at 03:23 PM.
Also, Anthony, I'd love to see you stop in the Pittsburgh / Cleveland area. I'd definitely stop by for a tune-tweak and to hang out with fellow Xfires.
Last edited by tom2112; May 13, 2009 at 05:30 PM.
Originally Posted by nox1s
Seems to me if you come to Detroit in August you can make the Woodward Dream Cruise.. a perfect opportunity!
(I had better start saving for that TvT265 kit...!)
(I had better start saving for that TvT265 kit...!)
Cheers.
And yes, beautiful Canada is just around the corner!!!!
Thread
Thread Starter
Forum
Replies
Last Post
xfireohio
Cars For Sale - Archive
10
Jul 20, 2020 12:03 AM
MAXIMUM
Cars For Sale - Archive
7
Aug 4, 2015 11:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



