Has anyone determined the best points to lift the crossfire with a standard floor jack; front, back and sides? I am thinking it might be an easy way to clean those wheels from the inside. I am currently out of the country, unable to go into my garage and look, and my mind was wandering about an easy solution.

I am aware about turning off the lift alarm.

 

Consult your owners manual for jacking/lift points.

 

Thanks that's helpful.

 

The service manual says to lift at the frame rails in front of the rear wheels and behind the front wheels.Lift one corner at a time and use jack stands.

 

I thought someone posted to disarm the tow-away alarm. Is that correct?
Could not find that specified in the manual.