TVTDesign Closed for Business???
Tried to visit the TVT website and it's shut down... Does anyone know if this is just a temporary website problem or are they down for the count? I know people have had some disagreements with them on the forum, but as far as I can tell they are the only source for bolt-on upgrades for the N/A motor out there... Would suck if they shut down before I got to install a few goodies.
Are they really closed for good? You have to shitting me.....That really sucks.
It was a good place to get good aftermarket parts, which as you all, are very hard to find.
Damn, this sucks
It was a good place to get good aftermarket parts, which as you all, are very hard to find.
Damn, this sucks
Anthony said he was going to be selling most of his tuning equipment and other things but didn't mention how he was going to go about selling it. I just got a ecu tune, throttle body and srt-6 intake done by him on Saturday; he said I was going to be the last ECU tune he did. You might want to contact him via email or the forum if you want to try to secure any parts he has left over.
Originally Posted by caddymike85
Anthony said he was going to be selling most of his tuning equipment and other things but didn't mention how he was going to go about selling it. I just got a ecu tune, throttle body and srt-6 intake done by him on Saturday; he said I was going to be the last ECU tune he did. You might want to contact him via email or the forum if you want to try to secure any parts he has left over.
Am I correct in saying that the 74mm TB many have used is simply an OEM unit from another benz?
If this is the case, we should not need TVT to source them, mark them up, and resell them to us
If this is the case, we should not need TVT to source them, mark them up, and resell them to us
Originally Posted by BoilerUpXFire
Am I correct in saying that the 74mm TB many have used is simply an OEM unit from another benz?
If this is the case, we should not need TVT to source them, mark them up, and resell them to us
If this is the case, we should not need TVT to source them, mark them up, and resell them to us

I don't mean to steal this thread, but can someone please explain in simple terms, what is the advantage of a 74 mm TB, over what is a stock TB ?
Originally Posted by No_Dominion
John, after looking into alternate sources, I think you're right. I actually just found some of them on eBay for 125, used, but still a good deal.
@ IBLUBYU - The stock throttle body size is 68mm, by upgrading to a 74mm TB in addition to a 3" CAI and a larger MAF housing you open up the intake system and make it less restrictive.
@Doc - I think I might have to ****** one of them up, unlikely to find another one for that cheap out there.
@Doc - I think I might have to ****** one of them up, unlikely to find another one for that cheap out there.
Last edited by No_Dominion; Dec 6, 2010 at 06:00 PM.
Originally Posted by No_Dominion
NeedsWings Dual CAI setup replaces the TB and MAF housing, as wel.
bummer to hear tony closed up shop, best of luck to him
Originally Posted by NeedsWings
we do not include throttle bodys
bummer to hear tony closed up shop, best of luck to him
bummer to hear tony closed up shop, best of luck to him
Originally Posted by No_Dominion
@ IBLUBYU - The stock throttle body size is 68mm, by upgrading to a 74mm TB in addition to a 3" CAI and a larger MAF housing you open up the intake system and make it less restrictive.
Phil, you do not need a 74mm TB for the SRT6... it has one stock.... the 74mm upgrade is for the NA troops....
sorry to hear about TVT...
sorry to hear about TVT...




What did they do with all their stock?