Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

TVTDesign Closed for Business???

Thread Tools
 
Old Dec 6, 2010 | 07:58 PM
  #21 (permalink)  
TomStratRT's Avatar
Forum Regular
Joined: Apr 2010
Posts: 658
Likes: 2
From: Maryland
Default Re: TVTDesign Closed for Business???

Glad I ordered my tubes when I did. Sucks that they are closing up.
 
Reply
Old Dec 6, 2010 | 09:10 PM
  #22 (permalink)  
billvp's Avatar
Forum Regular
Joined: Aug 2009
Posts: 536
Likes: 1
From: IA
Default Re: TVTDesign Closed for Business???

the forum probably killed their Crossfire business by banning them
 
Reply
Old Dec 6, 2010 | 09:20 PM
  #23 (permalink)  
Erzer's Avatar
Senior Member
Joined: Dec 2007
Posts: 2,123
Likes: 1
Default Re: TVTDesign Closed for Business???

Is this really a surprise considering some of the problems earlier this year and the subsequent ban? I remember responding to a post where things were getting pretty heated and asked TVT to get with the moderators rather than letting things air out in the public forum. To me it seemed as if things never healed and he was selling off a lot of stuff over the past few months.

I personally had no dealings with them, but did find their products to be interesting to read about. I only wish I lived closer to them as well as NeedsWings just to see what they could educate me on as I considered mods.
 
Reply
Old Dec 6, 2010 | 09:24 PM
  #24 (permalink)  
32krazy!'s Avatar
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Default Re: TVTDesign Closed for Business???

Originally Posted by billvp
the forum probably killed their Crossfire business by banning them
the forum didnt kill their buisness by banning them they killed their buisness on here by being less than honest.
 
Reply
Old Dec 6, 2010 | 09:39 PM
  #25 (permalink)  
Erzer's Avatar
Senior Member
Joined: Dec 2007
Posts: 2,123
Likes: 1
Default Re: TVTDesign Closed for Business???

Originally Posted by 32krazy!
the forum didnt kill their buisness by banning them they killed their buisness on here by being less than honest.
They had their following and sadly for both them and their fans they no longer are in business. Hopefully they are surviving some other way. That said, there is no reason to get into a tizzy about this yet again in my opinion.
 
Reply
Old Dec 6, 2010 | 09:53 PM
  #26 (permalink)  
Jason_HBC's Avatar
Forum Regular
Joined: Nov 2008
Posts: 511
Likes: 0
From: Central Indiana
Default Re: TVTDesign Closed for Business???

Its unfortunate when a business has to close, however I do not recall any real proprietary products. Its not like they had a one of a kind product or something that was the only player in the game, i.e. supercharger pulley ect. Again sad to see them go, but if the business isnt profitable there comes a time and place to wind her down.
 
Reply
Old Dec 6, 2010 | 11:57 PM
  #27 (permalink)  
billvp's Avatar
Forum Regular
Joined: Aug 2009
Posts: 536
Likes: 1
From: IA
Default Re: TVTDesign Closed for Business???

Originally Posted by 32krazy!
the forum didnt kill their buisness by banning them they killed their buisness on here by being less than honest.
I'm not going to bother searching through the posts, but it seems like FP or someone was claiming TVT was also some other guy (or multiple guys) because of a Blackberry (possibly floating) ip address ... and one of the guys they were claiming TVT was, was actually a member that several other members had met. So that cast a lot of doubt on the other claims to me.
 
Reply
Old Dec 7, 2010 | 12:10 AM
  #28 (permalink)  
psuperti's Avatar
Senior Member
Joined: Jun 2006
Posts: 1,281
Likes: 15
From: Palm Beach FL
Default Re: TVTDesign Closed for Business???

We need to make sure Needswings stays open
 
Reply
Old Dec 7, 2010 | 12:26 AM
  #29 (permalink)  
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: TVTDesign Closed for Business???

Perhaps Rob (NeedsWings) will pick up any slack .
 
Reply
Old Dec 7, 2010 | 07:16 AM
  #30 (permalink)  
Alzilla's Avatar
Joined: Mar 2010
Posts: 231
Likes: 0
From: Minnesota
Default Re: TVTDesign Closed for Business???

Originally Posted by 32krazy!
the forum didnt kill their buisness by banning them they killed their buisness on here by being less than honest.
Sounds about right to me.

When Rudy sold me Paul's TVT kit, I was told it was the TVT300 kit (and by golly, it was based on what TVT claimed it to be in one of their threads). After I bought and installed everything and made a thread about it, someone from TVT said that I only had the TVT250+ kit, not the 300 kit because they "never sold that kit". Seems pretty shady to tell one customer one thing and tell another customer something else for the sake of making more $$$.

That being said, I'm still plenty happy with the TVT parts I do have. It's too bad they closed before I could get my tune from them.
 
Reply
Old Dec 7, 2010 | 10:07 AM
  #31 (permalink)  
JHM2K's Avatar
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 17
From: Murfreesboro, TN
Default Re: TVTDesign Closed for Business???

Cream rises to the top, and the sediment always hits the bottom. While I'm bummed that our resources have been narrowed, our opportunities for tuning remain basically the same. All tuning was outsourced IIRC, and many upgrades were OEM Benz that was simply polished.

Businesses like Needswings continue to thrive because Rob represents the customer before, through, and after the purchase. Jerry w/ Eurocharged is another good egg.

I haven't directly purchased anything from TVT but I'm using several of their components. All seems well built, but the drama on the forum was undeniably a stain on their public image. In hard times, that's the difference between staying open and locking the doors.

As someone else stated, more business for the guys still standing!
 
Reply
Old Dec 9, 2010 | 03:04 PM
  #32 (permalink)  
Tnaski's Avatar
Joined: Jun 2010
Posts: 46
Likes: 0
From: Maricopa, Arizona
Default Re: TVTDesign Closed for Business???

That's just great now I am stuck with the caster kits, I bought the whole kit for 700.00 and could only use 2 of the arms. Well another learning experience. This Crossfire thing is getting costly.
 
Reply
Old Dec 9, 2010 | 07:57 PM
  #33 (permalink)  
KrzyFast's Avatar
Forum Regular
Joined: Nov 2007
Posts: 532
Likes: 3
From: Currituck, NC
Default Re: TVTDesign Closed for Business???

Originally Posted by Tnaski
That's just great now I am stuck with the caster kits, I bought the whole kit for 700.00 and could only use 2 of the arms. Well another learning experience. This Crossfire thing is getting costly.
Why could you only use 2 of the arms?
 
Reply
Old Dec 9, 2010 | 08:53 PM
  #34 (permalink)  
Germany's Avatar
Forum Regular
Joined: Dec 2009
Posts: 305
Likes: 0
From: Berlin, Germany
Default Re: TVTDesign Closed for Business???

Originally Posted by Tnaski
That's just great now I am stuck with the caster kits, I bought the whole kit for 700.00 and could only use 2 of the arms. Well another learning experience. This Crossfire thing is getting costly.
Please do explain
 
Reply
Old Dec 9, 2010 | 09:52 PM
  #35 (permalink)  
bmorgan's Avatar
Senior Member
Joined: Aug 2009
Posts: 3,459
Likes: 12
From: Warner Robins, GA
Default Re: TVTDesign Closed for Business???

Don't forget the time he tried to sell Rudy's Supercharger. He lied about the mileage, and the fact that it was Rudy's. Got caught in a big lie on that one, though he did make a feeble attempt to explain it. There were other incidents as well, but alas.... No matter how good you treat some of your customers..... If you lie or mistreat others..... You get what you deserve in the long run.

https://www.crossfireforum.org/forum...ercharger.html
 
Reply
Old Dec 10, 2010 | 06:49 AM
  #36 (permalink)  
Tnaski's Avatar
Joined: Jun 2010
Posts: 46
Likes: 0
From: Maricopa, Arizona
Default Re: TVTDesign Closed for Business???

I purchased the whole kit 3 arms per side. When installing the arms no matter what combination I used the toe in was so severe that it could not be adjusted out. I ended up making my own and didn't cut his arms. The story on this whole ordeal is much longer with much more emails and discussion than I will go into. If we should meet in person I would surely show you pics and go over the whole situation, but I really do not want to trash someone over a disagreement on installation. Thus I have a set laying on the shelf.
 
Reply
Old Dec 10, 2010 | 02:50 PM
  #37 (permalink)  
hcarter's Avatar
Senior Member
Joined: Apr 2009
Posts: 2,358
Likes: 6
From: Kingsport Tn.
Default Re: TVTDesign Closed for Business???

wOW I must have been gone longer than i thought what kit did they sell for 700.00 (rear?) that had 3 pcs


Howard.
 
Reply
Old Dec 14, 2010 | 05:53 PM
  #38 (permalink)  
goodgenes79's Avatar
Forum Regular
Joined: Apr 2009
Posts: 547
Likes: 2
Default Re: TVTDesign Closed for Business???

I was planning on getting the TVT kit for when I cut my springs to lower my SRT. Bummer.
 
Reply
Old Dec 15, 2010 | 04:11 PM
  #39 (permalink)  
No_Dominion's Avatar
Thread Starter
|
Forum Regular
Joined: Aug 2010
Posts: 320
Likes: 3
From: Indianapolis
Default Re: TVTDesign Closed for Business???

Well, maybe NeedsWings will expand their product line a little and pick up selling some things that TVT had...
 
Reply
Old Dec 22, 2010 | 09:56 AM
  #40 (permalink)  
thenderaaa's Avatar
Joined: Mar 2008
Posts: 11
Likes: 0
Default Re: TVTDesign Closed for Business???

Ouch! I was waiting for my warranty to expire (this coming spring) before adding some of these parts! TVT looked to have the best selection of parts for these cars and the price on the cold air intake was the most reasonable I had seen (and people liked it!).
Sounds like the parts are still out there, just a matter of finding them (and yes, I have seen the Needwings site).
As they say, timing is everything.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Valk
Interior
25
Jul 12, 2021 09:49 PM
Bloo Ize
Crossfire Events and Meets
88
Sep 10, 2016 08:14 PM
RED DOG
-C-I-C-C-I Discussion
1
Oct 8, 2015 09:28 AM
Sweet2002
Crossfire SRT6
0
Sep 25, 2015 02:16 AM
eatmycrackers
Crossfire Roadster
3
Sep 23, 2015 09:08 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 07:09 AM.