I have a 2005 Crossfire Roadster that won't start. Instrument panel lights up and there is a clicking noise coming from the area of the Relay Control Module when I try to start. Roof and spoiler lights flash but don't work. Door locks and radio were working yesterday but not today. Battery is fully charged. Does all this run through the RCM or do I have other issues?

 

"battery fully charged" - well, still being fully charged, how old is it? Just buy a new one that have the correct voltage / amp and the car will start.

Second attempt may be that you'll have to resolder two points on the circuit board. go to "mystery no start" thread. use search mode.

third attempt may be to get a new CPS, crank positioning sensor. 3 easy and cheap solutions.

Good luck!

 

How do you know the battery is fully charged? You should rule out the battery first. Try jump starting it. If that works you need a battery.

 

Resolder three points.
Link provided below.

https://www.crossfireforum.org/forum...-no-start.html

 

Together we, thr fotum, stand united and strong I resoldered my n/a last year. Thought it only was two points.. good to know now for my SRT6. Hope all is well!