Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Unplugging Ultragauge

Thread Tools
 
Old Dec 9, 2011 | 05:45 PM
  #1 (permalink)  
KelloggKid's Avatar
Thread Starter
Joined: Sep 2011
Posts: 98
Likes: 0
Default Unplugging Ultragauge

I need to remove my Ultragauge so that I can send it in for repair. It doesn't seem to want to unplug from the socket under the dash. I didn't want to force it and don't see any kind of latch or anything that would keep it from unplugging. Is it just stiff or am I missing something?
 
Reply
Old Dec 9, 2011 | 06:35 PM
  #2 (permalink)  
maxcichon's Avatar
Senior Member
Joined: Sep 2007
Posts: 8,015
Likes: 14
From: MOFN, AL, 70 miles from George
Default Re: Unplugging Ultragauge

I found that mine fits the Crossfire much tighter than 2 other vehicles. It does not latch in any way-just "wiggle and rock" while pulling.
 
Reply
Old Dec 9, 2011 | 07:30 PM
  #3 (permalink)  
TomStratRT's Avatar
Forum Regular
Joined: Apr 2010
Posts: 658
Likes: 2
From: Maryland
Default Re: Unplugging Ultragauge

Same problem here and I've removed it several times. I use a pair of pliers and just don't squeeze very tight. Comes right off.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sterling57
Audio, Video and Electronics
1
Apr 11, 2016 06:11 PM
Wisconsinfdcrossfire
Engine, Exhaust, Transmission and Differential
3
Sep 20, 2015 10:04 PM
a7x6kse6
Interior
95
Apr 19, 2015 03:41 PM
pizzaguy
Engine, Exhaust, Transmission and Differential
23
Dec 20, 2014 06:32 PM
lildaddym
Troubleshooting & Technical Questions & Modifications
12
Jun 8, 2013 02:22 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:14 AM.