Hi there, first forum I've ever joined. I'm at a loss.

1983 Camaro 5.0 Cross Fire Injection no fuel to injectors.

I've in order:
checked relays and fuses fuell pump, Inj #1 and #2.. all the fuses
Replaced fuel pump and filter sock and fuel filter
have 13-14psi fuel pressure
replaced HEI module
replaced ECM
Traced wiring for a bad ground.

Still no fuel to injectors

please help me.

 

Not trying to be rude but this is a crossfire forum not a camaro forum you probably wont get much help here.

 

Thanks for the info. 83 Camaro with crossfire here.

running well now, set idling back to factory but having trouble when driving, it's stalling when stopped or when you give it gas to accelerate .... if you take it real easy it's fine.

Any help would be appreciated

Thank you

 

This is a Crossfire CAR forum ( The Chrysler C-R-O-S-S-F-I-R-E, 2005-2008 ), not a cross-fire injection forum. As suggested above, maybe try this on a Corvette forum ?
We have the Mercedes Benx M112 V6 engine, and while also fuel injected, it has NO relation to the 5.0 Chevy V8.

See picture below .........

 

Without looking in a manual, most GM throttle body injectors require 25-40 psi to operate properly.

 

Damn Canadians........hopefully he lives near 180....He'll get it going.

 

LMAO............I had a '92 Camaro w/ Crossfire injection, so I knew he was in the wrong house, but I did point that out and still tried help a car guy out.....