I don't like that funky over sized wing on my SRT6. It just looks like some grossly scaled Wright brothers design, that in no way, shape, or form, compliments the beautiful, smooth, and functional lines of a great car. It's got to go. Does anyone know if the SRT6 wiring harness includes the wiring to operate the spoiler? Thanks.

 

Sorry I can't answer your question. If the wiring is there, it still would probably need to be programmed into the ECU, or operate it manually.

 

Should be easy to find someone to swap wings with, and you can operate it manually or leave it up or down all the time. But anyone wanting an SRT6 will want the wing that went with it, which will leave you out in the cold.

 

What comes off easily, can go back on easily. I wouldn't throw away that Wright brothers wing. I was hoping for a plug and play, spoiler installation, with ECM control. Wishful thinking...
Thanks.

 

I have done this. The wiring is not done.

 

Thanks for the response. How complicated was the process of installing it, wiring it, and making it operational? Were you able to control it automatically? Did you write a book about all the detailed proceedures along with glossy photos? I would sure like to make the swap, if it's not major surgery.

 

Fubu will have the real details but I bought a NA wing off eBay for $100 to look at. The wiring has end stops already. You just need a flip flop relay to reverse the motor polarity. I have no idea if there are wires back there or not. I was going to tackle it when I open the hatch to check the lock vaccum line. There's plenty of ways to trigger the spoiler to automatically deploy.