CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Troubleshooting & Technical Questions & Modifications (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/)
-   -   only revving to 4000 RPM SRT6 (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/72055-only-revving-4000-rpm-srt6.html)

Beeker 07-18-2015 02:57 PM

only revving to 4000 RPM SRT6
 
I just bought a SRT6 roadster last month and the intercooler pump went out and thanks to this forum I was able to replace it with few issues. Ever since I replaced it the car just does not seem to have the same power and I noticed it only revs to 4000 RPM in park, but it revs past that when driving, I assume that normal? I have primed the new pump and bleed the air from the system. the engine has no mods just stock. I also just got the P0410 error code.

velociabstract 07-18-2015 05:16 PM

Re: only revving to 4000 RPM SRT6
 
The engine is limited to 4000 in park or neutral from the factory. So that's normal. You can read about the code in this thread.
https://www.crossfireforum.org/forum...-solution.html
I don't have an answer for the sensation of power loss.

Les

Beeker 07-20-2015 03:42 PM

Re: only revving to 4000 RPM SRT6
 
Is the secondary air pump on the drivers side near the front on the STR6? i was going to change the" blue check valve" to see if i could get ride of the P0410 code but i cannot find it.

ala_xfire 07-20-2015 03:46 PM

Re: only revving to 4000 RPM SRT6
 
Yes, it is mounted on the driver side fender well. The 'normal' cause of this code is burnt relay contacts on the air pump relay in the K40 ( RCM ) module.
You can send the RCM to tighed1 and for 20 smackeroos he'll replace that relay, solder the troublesome connections and install the "me so horny" mod.


All times are GMT -4. The time now is 12:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands