Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

only revving to 4000 RPM SRT6

Thread Tools
 
Old Jul 18, 2015 | 02:57 PM
  #1 (permalink)  
Beeker's Avatar
Thread Starter
Joined: Jul 2015
Posts: 4
Likes: 0
From: Va
Default only revving to 4000 RPM SRT6

I just bought a SRT6 roadster last month and the intercooler pump went out and thanks to this forum I was able to replace it with few issues. Ever since I replaced it the car just does not seem to have the same power and I noticed it only revs to 4000 RPM in park, but it revs past that when driving, I assume that normal? I have primed the new pump and bleed the air from the system. the engine has no mods just stock. I also just got the P0410 error code.
 
Reply
Old Jul 18, 2015 | 05:16 PM
  #2 (permalink)  
velociabstract's Avatar
Senior Member
Joined: Jul 2008
Posts: 4,525
Likes: 29
From: Puerto Rico
Default Re: only revving to 4000 RPM SRT6

The engine is limited to 4000 in park or neutral from the factory. So that's normal. You can read about the code in this thread.
https://www.crossfireforum.org/forum...-solution.html
I don't have an answer for the sensation of power loss.

Les
 
Reply
Old Jul 20, 2015 | 03:42 PM
  #3 (permalink)  
Beeker's Avatar
Thread Starter
Joined: Jul 2015
Posts: 4
Likes: 0
From: Va
Default Re: only revving to 4000 RPM SRT6

Is the secondary air pump on the drivers side near the front on the STR6? i was going to change the" blue check valve" to see if i could get ride of the P0410 code but i cannot find it.
 
Reply
Old Jul 20, 2015 | 03:46 PM
  #4 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: only revving to 4000 RPM SRT6

Yes, it is mounted on the driver side fender well. The 'normal' cause of this code is burnt relay contacts on the air pump relay in the K40 ( RCM ) module.
You can send the RCM to tighed1 and for 20 smackeroos he'll replace that relay, solder the troublesome connections and install the "me so horny" mod.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
steps
Crossfire Coupe
22
Apr 26, 2016 06:21 PM
rmcdaniel12
Crossfire SRT6
41
Nov 4, 2015 04:08 PM
rogerlemoine
WTB - Items/Parts Wanted to Buy - Archive
3
Oct 26, 2015 12:02 AM
Sweet2002
Crossfire SRT6
5
Oct 1, 2015 01:42 AM
Mackel
Parts/Accessories for sale - Archive
0
Sep 29, 2015 02:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 02:21 AM.