Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Check Engine Light came on after water pump installation...

Thread Tools
 
Old Oct 1, 2016 | 01:23 PM
  #1 (permalink)  
Firstpoet's Avatar
Thread Starter
Joined: Apr 2008
Posts: 199
Likes: 1
From: Ohio
Default Check Engine Light came on after water pump installation...

2006 XFire Lmtd - Took it in for a routine oil change and they said it was needing a new water pump - slight leak. Car has 12K miles on it...they replaced the water pump under the life-time warranty. When I picked it up I got a 1/2 block away and the check engine light came on, took it back, they cleared the code - said it was tied to an 'insurance monitor' (like Allstate, etc.) which I do not have...then we realized they had tried to 'read' the car's stats electronically through the port and an IPad...so we thought that's what it was...got a 1/2 block away again and then came back on...so they worked through it and now don't know why it keeps coming on...they said they're code reader is 'version 5' and the code needs 'version 7' so they need to borrow the card reader from another dealer...they do have an XFire certified guy (he's retiring) but he's looked after the car since new. Anyone have a similar experience, maybe knows what's going on? Did they're plugging in the port do something. Thanks so much!!
 
Reply
Old Oct 1, 2016 | 02:07 PM
  #2 (permalink)  
Steve Jr's Avatar
Senior Member
Joined: Sep 2015
Posts: 1,465
Likes: 4
From: Knoxville
Default Re: Check Engine Light came on after water pump installation...

Insurance monitor, IDK. Banks, sometimes install a GPS to track their investment: That isn't wired to be read, thur the OBD port. Is this a new car ?
 
Reply
Old Oct 1, 2016 | 03:13 PM
  #3 (permalink)  
Firstpoet's Avatar
Thread Starter
Joined: Apr 2008
Posts: 199
Likes: 1
From: Ohio
Default Re: Check Engine Light came on after water pump installation...

I've had it since new...turns out it was the MAP sensor...they damaged it when working on the car...glad they owned up to it and fixed it...thanks so much!!
 
Reply
Old Oct 1, 2016 | 03:47 PM
  #4 (permalink)  
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,351
Likes: 789
From: Central South Carolina
Default Re: Check Engine Light came on after water pump installation...

Originally Posted by Firstpoet
I've had it since new...turns out it was the MAP sensor...they damaged it when working on the car...glad they owned up to it and fixed it...thanks so much!!



Well SHOCKING!!! Where is that dealership? I know you have that warranty but for a service dept to admit to these things, it is refreshing!


.
 
Reply
Old Oct 2, 2016 | 11:51 AM
  #5 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Check Engine Light came on after water pump installation...

MAP sensor ?
Thought that was on the SRT6 only.
As far as I know, the NA's have the combined MAF/IAT sensor.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rodrofilo
Engine, Exhaust, Transmission and Differential
7
May 5, 2016 08:13 PM
helm
Crossfire Coupe
14
Mar 27, 2007 08:44 PM
chuckhaze
Troubleshooting & Technical Questions & Modifications
14
Mar 31, 2004 03:36 PM
helm
Crossfire Coupe
5
Dec 10, 2003 12:56 PM
X-fired
Troubleshooting & Technical Questions & Modifications
4
Jul 29, 2003 01:38 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 08:39 AM.