Does anyone have the actual specs for the rear alignment?

I just added a pair of adjustable upper rear control arms, and would like to get it dialed in at an alignment shop. I was able to get it real close in my garage - about 1/8" toe in, and maybe a degree of camber. (Tire top in)

I'm thinking they should be Straight up and zero toe?

They adjustments I've done have already made a world of difference.

Thanks in advance.


Speedway parts - Upper Control Arms.

 

Here ya' go...per Chrysler:

WHEEL ALIGNMENT

DESCRIPTION

SPECIFICATION

Vehicle level - front axle1.4° (-2.1/+1.4)Vehicle level - rear axle0.4° (±0.8)Ball point position30.5 ±2 mmFront axle toe-in0° 20'±10'Front Camber-1° 13' (-1.22°)Front Caster5° 12' (5.20°)Toe-out on turns with wheel on the inside of the curve steered through 20°-1° 25'±30'Rear Camber-1° 08' (-1.13° ± 0.5°)Total rear axle toe0 ° 33'±7'Permissible difference in front axle camber between right and left side of vehicle20'
Regards,

 

Perfect - Thank you.