36100

Reply Subscribe

Thread Tools

Feb 20, 2019 | 03:16 PM

#1 (permalink)

1951sms

Thread Starter

Joined: Jan 2019

Posts: 63

Likes: 0

From: sophia,WV

36100

I tried what a guy pit on youtube about turning the key switch over to the on switch three times to read codes and I get a picture of two tools then 36100 on the odometer.

Feb 21, 2019 | 09:43 AM

#2 (permalink)

zip439

Senior Member

Joined: Jul 2010

Posts: 2,266

Likes: 462

From: SE Alabama

Re: 36100

The "guy" told you wrong; you won't get diagnostic trouble codes that way from a Crossfire. Read your owners manual about the FSS. There you will see an illustration and explanation of the symbols.

Feb 21, 2019 | 09:53 AM

#3 (permalink)

onehundred80

Senior Member

Joined: Apr 2006

Posts: 25,432

Likes: 648

From: Ontario

Re: 36100

Quote:

Originally Posted by 1951sms

I tried what a guy pit on youtube about turning the key switch over to the on switch three times to read codes and I get a picture of two tools then 36100 on the odometer.

My old POS 300 used that method to display the trouble codes, the Crossfire does not rework like that. It actually showed errors on the 300 that my OBDII scanner did not show.
What you see is a double wrench service is required. You can do that yourself, no need to waste money at the stealership.
Down load the Service Manual and Owners Manual from this site and see what is required.