Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

This is wierd

Thread Tools
 
Old Aug 16, 2019 | 10:19 AM
  #1 (permalink)  
Speedy4x4's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default This is wierd

Last night when I was on my way home from KY, I stopped by sonic for some supper, when I pulled out, nice and smooth exit, not much throttle, my silver fox started running rough, and the accelerator quit working, got pulled into a KFC and it was running rough, I was thinking it seemed like it was getting to much air.
No codes.
Turned ignition off waited a minute then restarted, was running real rough, then it died, I popped the hood and looked around, if I could see anything stand out at me, got back in and it started back up, seemed to be running fine, I asked my baby to get me the next 1 1/2 hours home and I would dig in and figure out the problem.
Still no codes.
Leaving KFC it seemed like the pedal had a delay and more responsive, slight delay on acceleration but when it did, seemed like it had another 30 hp, alot more giddy up, and shifting through the gears, everytime I let off the accelerator to shift and back on was a delay and very very slight studded then cam alive.
Still no codes.
Got to just 15 minutes from home and pulled over and turned off for 30 ish minutes and walked around a store, giving time for her to cool down some and see what happens.
After restart codes came up.

P0101 - powertrain
Mass or volume air circuit change / performance problem

P0221 - powertrain
Throttle / pedal position sensor / switch "b"
Circuit range / performance problems

Thought that explained the problems in was thinking with the air flow and the pedal.
But I don't remember and searched here and haven't seen problems with the throttle pedal sensor.
Thought great this might be another impossible part to find.

182,251 miles

Curious if anyone has remembered a problem with the accelerator sensor?
Granted any part can go out, I am just surprised if the accelerator assembly having a problem.
 
Reply
Old Aug 16, 2019 | 09:27 PM
  #2 (permalink)  
Speedy4x4's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default Re: This is wierd

Have s SS from torque, but not letting me upload pic
 
Reply
Old Aug 16, 2019 | 09:40 PM
  #3 (permalink)  
zip439's Avatar
Senior Member
Joined: Jul 2010
Posts: 2,266
Likes: 462
From: SE Alabama
Default Re: This is wierd

Have you read this : OBD CODE P0221
Hope that helps.

Just for giggles try a throttle reset.
 
Reply
Old Aug 17, 2019 | 01:10 PM
  #4 (permalink)  
Speedy4x4's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default Re: This is wierd

I have another maf somewhere, but can't find it
 
Reply
Old Aug 18, 2019 | 12:12 AM
  #5 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: This is wierd

Originally Posted by Speedy4x4
I have another maf somewhere, but can't find it
Sorry I cannot resist, what a weird title to the thread.
 
Reply
Old Aug 18, 2019 | 08:50 PM
  #6 (permalink)  
Speedy4x4's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2013
Posts: 2,006
Likes: 15
From: Southern IL.
Default Re: This is wierd

Originally Posted by onehundred80
Sorry I cannot resist, what a weird title to the thread.
Have to think of something catchy
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pejman
Crossfire Roadster
5
Jul 20, 2009 12:54 PM
blackcrossfire07
Crossfire Roadster
1
Feb 5, 2009 11:19 AM
Maxwell
General
5
Nov 18, 2007 01:04 PM
andrewnhill22
Engine, Exhaust, Transmission and Differential
14
Aug 23, 2007 02:12 PM
gibsonjunkie
Audio, Video and Electronics
8
Sep 28, 2005 09:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 06:42 PM.