I need to know what the wires go to and from at the Ignition Switch. I'm not very good on reading the Wiring diagrams. Something like a pictorial diagram would help. Not getting power to my Switch, thanks for your help..

 

I don't have any pictures, but this says if there is no 12v on the 2 RED wires, then you have a severed harness or a blown 200 amp fuse in the tiny box in front of the battery.

 

Thanks very much, hopefully now I might find my problem.

 

Have you tried pulling codes to see what it’s throwing ? Ignition iwiring doesn’t really seem to ever cause issues here but they’re are things related/connected to that circuit that could cause the ignition to fail.

 

For over a year there has been one question after another, I do not think I have seen one fault solved entirely.
Problems follow problems endlessly. There must be a common cause to all this surely. I gave up ages ago as problems piled up and different threads were born.. Much too confusing for this old brain.🤔

 

Returning your comment about the Ignition Switch. None of my repairs or replacements have cured my starting problem.Today is the first time that I've had a chance to get back on it for months. Hopefully I will get it running quickly. Thanks for all your help. Being in the Hospital for 4 months is a Bear.