Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Low on Compression Testing

Old Oct 4, 2021 | 06:21 AM
  #1 (permalink)  
Fancyface831's Avatar
Thread Starter
Joined: Jun 2021
Posts: 15
Likes: 0
From: Salinas, Ca
Default Low on Compression Testing

I have a 2008 Crossfire. Its low on compression on #6 which had the misfire code. What could cause this?
 
Reply
Old Oct 4, 2021 | 07:08 AM
  #2 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Low on Compression Testing

rings, valve seating ( carbon ), bent valve. tiny hole in piston
 
Reply
Old Oct 4, 2021 | 10:25 AM
  #3 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Low on Compression Testing

Burnt valve face, head gasket, cylinder wall scored.
 
Reply
Old Oct 4, 2021 | 04:09 PM
  #4 (permalink)  
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,358
Likes: 797
From: Central South Carolina
Default Re: Low on Compression Testing

Originally Posted by Fancyface831
I have a 2008 Crossfire. Its low on compression on #6 which had the misfire code. What could cause this?


Weak coil, spark plug(s) wires, spark plug(s)...

Start with the low cost items first, easy to move a coil and see if the code moves, same for the wires and plugs Good luck!


.
 
Reply
Old Oct 4, 2021 | 05:01 PM
  #5 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,639
Likes: 776
From: Orange County CA.
Default Re: Low on Compression Testing

It sounded like he did a compression test?
 
Reply
Old Oct 10, 2021 | 05:33 PM
  #6 (permalink)  
Fancyface831's Avatar
Thread Starter
Joined: Jun 2021
Posts: 15
Likes: 0
From: Salinas, Ca
Default Re: Low on Compression Testing

What is the best way to compression test
 

Last edited by Fancyface831; Oct 10, 2021 at 05:36 PM.
Reply
Old Oct 10, 2021 | 05:36 PM
  #7 (permalink)  
Fancyface831's Avatar
Thread Starter
Joined: Jun 2021
Posts: 15
Likes: 0
From: Salinas, Ca
Default Re: Low on Compression Testing

What kind of engine is in a 2008 Chrysler Crossfire
 
Reply
Old Oct 10, 2021 | 05:51 PM
  #8 (permalink)  
philosophico's Avatar
Forum Regular
Joined: May 2013
Posts: 500
Likes: 29
Default Re: Low on Compression Testing

Originally Posted by Fancyface831
What kind of engine is in a 2008 Chrysler Crossfire
Just a standard 3.2 v6. Known as mercedes m112. One of there best v6's ever made. Its basically bulletproof and should go a minimal or over 250k miles if left stock and maintained.
 
Reply
Old Oct 11, 2021 | 10:14 AM
  #9 (permalink)  
NeedsWings's Avatar
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Low on Compression Testing

pull off the exhaust manifold and see if the air is leaking out the exhaust port = leaking past the valve due to buildup, i have seen that before
 
Reply
Old Oct 11, 2021 | 06:23 PM
  #10 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Low on Compression Testing

Originally Posted by Fancyface831
I have a 2008 Crossfire. Its low on compression on #6 which had the misfire code. What could cause this?
please list the 6 compression readings along with cylinder number.
 
Reply
Old Oct 11, 2021 | 06:28 PM
  #11 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,639
Likes: 776
From: Orange County CA.
Default Re: Low on Compression Testing

Reading posts 6 and 7 it sounds like he hasn't done it yet and is not sure what kind of engine he has.
 
Reply
Old Oct 11, 2021 | 06:44 PM
  #12 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Low on Compression Testing

Originally Posted by ZERACER
Reading posts 6 and 7 it sounds like he hasn't done it yet and is not sure what kind of engine he has.
Somewhere near Salinas, Lord, he let that slip away ......
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jocko124
WTB - Items/Parts Wanted to Buy - Archive
0
Sep 5, 2015 09:10 PM
dayjor
WTB - Items/Parts Wanted to Buy - Archive
0
Nov 29, 2014 10:13 PM
Chris L.
Crossfire Coupe
20
May 12, 2013 09:25 AM
yorktown4
Audio, Video and Electronics
3
Apr 15, 2012 11:30 PM
DTMenace
Cars For Sale - Archive
0
Aug 16, 2010 03:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


All times are GMT -4. The time now is 11:18 PM.