crossfire mechanic will be in central Florida
Matt, who most of you know who he is,, is coming up to central Florida (Melbourne) to do some repairs on some crossfires, then going to Tallahassee to work on another one so if you need something done to your crossfire in either location let me know so Martt can get the parts that you need ,unless you already have the parts.
the date is unknown at this time but will be within the next 4 weeks pm or email me your needs jim amx1397@gmail.com jobs to be done so far.
1 changing a drive shaft center bearing
2 changing out a differential
3 repairing cylinders on convertible top.

 

I'm about 2.5 hours from Tallahassee. I don't need any repairs, but I wouldn't mind cruising over to meet other Crossfire gear heads.

 

I know where you r as i go north to CF or south to ft laud, i pass right by u
I lived in ft laud for 35 years and had a condo in Melbourne beach for the last 5 years,, so 6 mo ago we came to CF and just stayed, any way Matt has a big shop in Miami ,,he is good at what he does ,Mercedes/crossfires , we hope a few people that need work done will be in touch. soon maybe 4 to 5 mos from now
he is on his way to upstate New York to work on a Lamborghini, and then to New Jersey to work on a crossfire,,
He also has and does tell the owner over the phone what to do to repair it them selves mainly the no start and stuff.

 

sorry I forgot to answer your question, I do not know where or how many people will be there but Matt said to me after Melbourne he will be going in Tallahassee .

 

Does he have a DRB 111? Can he activate new TPMS sensors? Might he be interested in changing out a ball joint? I have the part, air tools and a pickle fork, jacks, etc...Villages Area..just off 441. Let me know , thanks.

 

I sent him your question, are you in Ocala that is less than 2 hours from here my son lives in silver springs

 

Matt has a new tpms system that LOCKS on to the valve stem( locks on with a tool can not be removed by hand) it reads each tire , it reads heat so u know if a tire or bearing is getting hot u can set it to alarm with loss or 2 psi or what ever you set it for ,,it goes to your phone and or a module. OH the COST is less than $100.00

 

I'm way out west in the panhandle, almost to Pensacola. But, like I said, I'd jump in the car and head to Tallahassee for a day of XF fun.

 

~ Yes, I am aware of those, I will probably use them on my Vega, however, I want to keep the stock tpms on the Crossies.

 

then the only way i know is to go to a tire shop see if they have the two tpms P/N that will work in our crossfire and they have the programmer to reset them. I will ask matt for some info on the stock system. part numbers