Hi everyone,

I replaced my whole headlight unit due to water ingress, the new unit is totally dead (came from a working donor Crossfire I also own) - Fuses are fine, which I'm surprised by. Getting around 1.1V on the side light connector and around 3.1V on the main headlight loom, which are bizarre readings - Other side is working perfectly, I'm a bit stumped... The fuse box on the driver's side has each beam broken out per fuse, I was wondering if there are any other fuses elsewhere that control the entire headlight unit loom? Any ideas would be much appreciated

By the way, it's a 2007 SRT6 - UK version (wheel on the CORRECT side lol just kidding)

Thanks in advanced,
Andy