Build your own automatic roof module
Build your own automatic roof module
Hello,
I want to show you how you can build your own automatic roof module. With this module your can open and close your soft top with only a short push on the switch. You don't have to push it until it is full opened or closed.
This works also up to a driving speed you can set in the module, I recommend not higher as 31 mph.
And when the soft top is completely opened the windows raised up automatically.
And the hardware cost are about 20$.
You can get further informations and the necessary files on Github: https://github.com/viper-666/xf_roof_module
I hope this is interesting and helpfully for you.
I have a request to you as native English speaker, if you find anything what is unknowable or misspelled please correct it on Github or write me a PM.
Regards from Germany
Andre
I want to show you how you can build your own automatic roof module. With this module your can open and close your soft top with only a short push on the switch. You don't have to push it until it is full opened or closed.
This works also up to a driving speed you can set in the module, I recommend not higher as 31 mph.
And when the soft top is completely opened the windows raised up automatically.
And the hardware cost are about 20$.
You can get further informations and the necessary files on Github: https://github.com/viper-666/xf_roof_module
I hope this is interesting and helpfully for you.
I have a request to you as native English speaker, if you find anything what is unknowable or misspelled please correct it on Github or write me a PM.
Regards from Germany
Andre