U.K. Serving all countries of the United Kingdom.

Adding First aid and Triangle Kit

Old Jun 19, 2011 | 07:33 PM
  #1 (permalink)  
onehundred80's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Adding First aid and Triangle Kit

I am going to add the above items and store them the way they are in the UK Crossfires.
I could guess and add the slots for the Velcro but I would prefer to put them in the same position as they are there.
Could a friendly UK member measure the positions and slot sizes, put them on a drawing and post it here? I think there are six slots.
I have the correct triangle and a Merc first aid kit, I am looking for the correct safety kit but what I have will do for now.
The photo shows the set up I want to duplicate. The photo is from the forum and was posted by a UK member who I would like to thank. I have unfortunately forgot his name.
 
Reply
Old Jun 20, 2011 | 03:46 PM
  #2 (permalink)  
Steve - UK's Avatar
Senior Member
Joined: Sep 2007
Posts: 1,689
Likes: 0
From: UK Crossfires Club
Default Re: Adding First aid and Triangle Kit

Yes the first-aid kit sits in the big velcro loop with the triangle held in the smaller loops. These 2 items are the only safety kit in the European (UK) models. But there should also be a fluorescent waistcoat packed tight inside the triangle. I will do some measurements next weekend an post up..
 
Reply
Old Jun 20, 2011 | 04:44 PM
  #3 (permalink)  
onehundred80's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Adding First aid and Triangle Kit

Originally Posted by Steve - UK
Yes the first-aid kit sits in the big velcro loop with the triangle held in the smaller loops. These 2 items are the only safety kit in the European (UK) models. But there should also be a fluorescent waistcoat packed tight inside the triangle. I will do some measurements next weekend an post up..
Thanks a lot, much appreciated.
BTW I have the super deluxe triangle, it has a fluorescent three piece, four button Hugo Boss suit in it. LOL
 
Reply
Old Jul 1, 2011 | 07:35 AM
  #4 (permalink)  
onehundred80's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Adding First aid and Triangle Kit

Bump, Bump, Hint, Hint. Nudge, Nudge, Wink, Wink.
 
Reply
Old Jul 12, 2011 | 06:21 PM
  #5 (permalink)  
onehundred80's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Adding First aid and Triangle Kit

Bump, Bump, Hint, Hint. Nudge, Nudge, Wink, Wink.
 
Reply
Old Jul 15, 2011 | 05:23 PM
  #6 (permalink)  
Steve - UK's Avatar
Senior Member
Joined: Sep 2007
Posts: 1,689
Likes: 0
From: UK Crossfires Club
Default Re: Adding First aid and Triangle Kit

Originally Posted by onehundred80
I am going to add the above items and store them the way they are in the UK Crossfires.
I could guess and add the slots for the Velcro but I would prefer to put them in the same position as they are there.
Could a friendly UK member measure the positions and slot sizes, put them on a drawing and post it here? I think there are six slots.
I have the correct triangle and a Merc first aid kit, I am looking for the correct safety kit but what I have will do for now.
The photo shows the set up I want to duplicate. The photo is from the forum and was posted by a UK member who I would like to thank. I have unfortunately forgot his name.

OK - The pair of slots/velcro loops for warning triangle:
There is 10" inches between the 2 loops. By offering up the red case you will easily judge precise location.

The bigger loop is set 4" above the warning triangle and obviously in centre position.

The space between the slots for each individual loop to thread through is 1"

Hope this does it!

Steve
 
Reply
Old Jul 15, 2011 | 05:39 PM
  #7 (permalink)  
onehundred80's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Adding First aid and Triangle Kit

Originally Posted by Steve - UK
OK - The pair of slots/velcro loops for warning triangle:
There is 10" inches between the 2 loops. By offering up the red case you will easily judge precise location.

The bigger loop is set 4" above the warning triangle and obviously in centre position.

The space between the slots for each individual loop to thread through is 1"

Hope this does it!

Steve
Thanks Steve
Does the triangle bounce around as it would be just sitting in mid air and bouncing on the bottom lip?
Dave
 
Reply
Old Jul 15, 2011 | 07:34 PM
  #8 (permalink)  
Steve - UK's Avatar
Senior Member
Joined: Sep 2007
Posts: 1,689
Likes: 0
From: UK Crossfires Club
Default Re: Adding First aid and Triangle Kit

No Dave it should sit in the reses on the ledge, the loops holding it firmly in place in there out of the way. The first aid kit sitting just above it.

ps, sorry for slow response, I had wanted to post a pic of mine in place, but have miss laid cable to attach my camera to lap top - its in one of my "safe places" !
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smfrycruzr
Exterior & Lighting
29
Jul 17, 2023 05:33 PM
UNDER PSI
Crossfire SRT6
8
Nov 1, 2015 09:39 PM
2005 Ragtop
Wheels, Brakes, Tires and Suspension
7
Oct 3, 2015 03:01 PM
Big Daddy
WTB - Items/Parts Wanted to Buy - Archive
0
Sep 10, 2015 10:21 PM
xfireon20z
Cars For Sale - Archive
8
Sep 10, 2015 04:27 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:12 PM.