Re: Drive shaft flexible disc
Originally Posted by
Infinity
Just wanted to add some part numbers for the SRT6.
As we can all tell from Chryslers part listings they do not show a flex disc kit for the SRT6, only the NA. Now I am not saying one is not out there somewhere in Chrysler land but here is what I found today.
The SRT uses two part numbers A 203 411 00 15 for the rear and A 210 411 02 15. Now here is where things get interesting! Mercedes dealers do have these, however the part casting number is not the part number on the boxes. Normally we see A170 for the slk32 and those are the part numbers on the bag, at least in my experience.
The units I picked up today are the a 000 411 02 00 and a 230 410 01 05
Not the real kicker is that if you use the casting part numbers at the dealer, only one of them is available in the US, the other one comes up as a Euro part only and must match to a euro vin. Funny thing is that one of the part numbers above is actually that part.
This is not always true, the numbers after the A are the car series that the part was originally made for, So if an SLK32 used a part from a previous model that part number would stay the same, if there was a slight change in the part for the SLK then the first numbers would stay the same but it would have the revision numbers and update numbers changed. Or something like that. 
000 numbered parts are parts that could go on various models and are not model specific.
That's my understanding of the numbering system.
See this thread for more details.
Autohausaz parts
Pelican Parts
Last edited by onehundred80; Jun 6, 2013 at 10:35 PM.