Thread: Help Please... Crossfire has delay when press accelerator!
View Single Post
Old Apr 16, 2014 | 12:45 PM
  #16 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Help Please... Crossfire has delay when press accelerator!
Originally Posted by Indelibility
Yeah, the MAF is in the curved tube at the back of the engine. Don't just spray MAF cleaner in there!!! You have to take it apart, but it can be a pain to tackle.

Check this thread out for instructions to the MAF: https://www.crossfireforum.org/forum...ade-guide.html

Some good ideas in here too: https://www.crossfireforum.org/forum...ode-p0172.html
The MAF sensor is actually located in the MAF body that connects to the elbow above the throttle body, the air cleaner attaches to the MAF body.
Photos are here as well.
 
Reply
0