Thread: My Crossfire starts well but dies immediately and repeatedly.
View Single Post
Old Jan 14, 2018 | 09:03 AM
  #20 (permalink)  
onehundred80's Avatar
onehundred80
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: My Crossfire starts well but dies immediately and repeatedly.
Originally Posted by STRANDD
Besides Rob's instructions, there's good info from forum members and you can find the Crossfire repair manual on here. I managed to do it.....and if I can.....you can. Probably the hardest part was taking everything apart and waiting two weeks for the new Skreem to come in. Would have been easier for me to remember where things go working straight through. I would suggest waiting until the new Skreem comes in. Good luck!
A good idea is to take notes and/or take photos as you go if it is a complicated or a lot of parts are involved. It is always a bit worrisome when after putting everything back together you find a screw or two left over. Taking notes of screw lengths is a good idea, diameters are easy to figure out.
You know you have screwed up big time when your mileage improves due to the weight loss of the parts you had left over.
 
Reply
0