Originally Posted by
BlakeSwain
Been a while since I posted anything!
Just wanted to let you guys know.... I'm still working on this project! I haven't had the full time available to "hit the project hard".
The designs are slowly coming together. I have had to rework many of the areas, to get my results just right.
When I have something to really show... it will be posted!
From my experience the bezel can be held in using the two screws at the top of the radio aperture and the lips that surround the sleeve for the Nav unit.
The sleeve should be attached with four screws to the roof panel of the radio aperture. This means no load is taken by the bezel and the lips hold the sleeve against the console.