Stainless Steel braided hoses, some now have the steel braid covered in plastic, the ones from NW are.
I think the SS hoses make a very minimal difference.
I think my ABS module has air in it from when I changed the master cylinder thinking it could be the problem.
I have too much pedal stroke but they stop just fine, I am going to change the fluid again, and check the pads and rotors and look for any slight leak. They seem leak free but you never know.
I want a two way reader to activate the ABS to bleed it. Maybe some genius could discover what terminals on the ABS pump could be jumped to push oil through the ABS valves to bleed them.
This problem has bugged me since 2011 when I got the SRT, the limited never was that way I an
m sure.