Originally Posted by
amx1397
Has anyone tried a repair with Q bond I repaired a door handle on my c320 and it is still holding after pulling on it for almost a year.. also used it on the overhead light inside the car two years ago ( the clips that hold the light up)
and used it on a cofee cup handle of my wife's favorite coffee cup still holding on.
That is what I used for the first repair
it held for a while. In order to get it to hold, you have to fill every bracket cavity with Q bond
the bracket is held in place by 2 nuts and the divider going into and back out of the bracket are too much for the Q Bond
that was my experience.
my bracket was cracked in Half