Originally Posted by
Haydyn
I am completely locked-out of the trunk / boot on my UK 04 right hand drive Roadster with a soggy pump!
I have no access to the pneumatic lock via the ‘tag’ / ‘reg’ lights due to an ‘anti-theft’ plate.
QUESTION: If I sacrifice the rear Chrysler emblem by drilling a hole big enough to get a tool in…can I see the pneumatic lock mechanism so I can move it and unlock????
Is there any access via the latch?
If anyone has their trunk panel off… could you send me a photo of the centre of the Chrysler emblem from the inside?
Would really appreciate some help here guys…it’s driving me nuts!!!
Can you provide a picture of the anti-theft plate the blocks access to the license plate lights.
Are you sure it's the pneumatic lock and not the Secondary Electric Lock that has the trunk lid locked.
There is a simple backdoor method to unlock the trunk, try this first before trying to release the locking arm through the right license plate light opening.I would try the following instructions before attempting to drill into the trunk lid.
With the ignition “On” press the “Top Down “ button. While holding the button turn off ignition and hold button 10 seconds. Trunk should unlock.