Originally Posted by
dedwards0323
I also recommend the DIY thread ongoing from
M60A3Driver. His DIY write-ups are among the best on the Forum. His ongoing thread of DIYs is really something to follow. Here's the link to his DIY on removing, repairing & re-installing the windshield trim:
CLICK
I appreciate the mention dedwards0323.
I had never done mine before I made that post.
Patience is the key and measure out where the clips ate located, then mark the windshield with tape, chalk or a crayon.
Start with the top piece when removing, start with the side pieces when re-installing.
I've gone over 110 in my car and didn't lose anything.