The Official "Black" C-R-O-S-S-F-I-R-E Photo Thread
Here's similar views with my stock wheels.
DSCF0507.jpg
DSCF0510.jpg
Here's a close up of the 255/30ZR20 PS2 on the 20X9.5 Stern Beast Wheel. I believe it's an optical illusion. I can just get my thumb in between the tire and fender at the front of the back wheels. Two years of driving, no rubbing front or rear!
P7030064.JPG
DSCF0507.jpg
DSCF0510.jpg
Here's a close up of the 255/30ZR20 PS2 on the 20X9.5 Stern Beast Wheel. I believe it's an optical illusion. I can just get my thumb in between the tire and fender at the front of the back wheels. Two years of driving, no rubbing front or rear!
P7030064.JPG
You know Boiler, looking at the pics, it looks like it IS sitting up higher. I'm running 19's in front and 20's in the back. Overall tire diameters are very close to stock but sidewalls are a bit shorter. Aesthetically, it looks like the car would look better lowered about 1 inch in front and 1.5 in the back. Just don't want to be scraping the belly over speed bumps and potholes!
Originally Posted by KevinMcSp
You know Boiler, looking at the pics, it looks like it IS sitting up higher. I'm running 19's in front and 20's in the back. Overall tire diameters are very close to stock but sidewalls are a bit shorter. Aesthetically, it looks like the car would look better lowered about 1 inch in front and 1.5 in the back. Just don't want to be scraping the belly over speed bumps and potholes!
Would look even better 1-2 inches lower, but what doesn't?
Originally Posted by whereiswaldo
I am a new SRT owner and a fellow forum member directed me to this site. Here are some pictures I took of my black beauty.
Thanks! I just noticed you live in TN check out the tail of the dragon thread I'm planning on going but its a hell of a drive for me to do in three days. I am currently looking for an IT related job in TN or south east KY so if all goes well ill be moving in late september! Cheers and welcome to the forum!
Originally Posted by whereiswaldo
I am a new SRT owner and a fellow forum member directed me to this site. Here are some pictures I took of my black beauty.
Later,
Looking good, but you need to fix that massive gap under you grille. I have had 2 of the same ones and they need to be 'massaged' into place. I changed the look of mine by recessing it into the grill more, cutting and relocating tabs, but it lays down nice now (check the gallery)....
Originally Posted by BoilerUpXFire
Looking good, but you need to fix that massive gap under you grille. I have had 2 of the same ones and they need to be 'massaged' into place. I changed the look of mine by recessing it into the grill more, cutting and relocating tabs, but it lays down nice now (check the gallery)....

With my DCAI the grille is only held on by the two top bolts because I couldn't get my fingers under to lock the bottom tabs. You're saying you relocated them though? By cutting new ones?
Originally Posted by dedwards0323
Very nice looking example of an SRT-6. Welcome to The Forum. Hope to see you at our Tail of the Dragon weekend GTG on 09/30 - 10/02.
Later,
Later,
Do you have more information on this Tail of the Dragon weekend?
Originally Posted by Erichenderson02
I guess it's more noticeable than I thought. 
With my DCAI the grille is only held on by the two top bolts because I couldn't get my fingers under to lock the bottom tabs. You're saying you relocated them though? By cutting new ones?

With my DCAI the grille is only held on by the two top bolts because I couldn't get my fingers under to lock the bottom tabs. You're saying you relocated them though? By cutting new ones?
I have rebent the grille slightly - to get more arc and set it back a little more for depth, shortened the tabs to accomodate the recessed grille, and bent them a little till I could use the mounting points.
On the bottom I used zip ties for a few months, tieing the bottom of the grill through the small 'lip' on the bumper cover at the rear, and over time, it ended up contouring the grille and bumper cover to look a lot better, I cut the zip ties weeks ago, but the change is permanent.
As I said, a lot of 'massaging'
Originally Posted by whereiswaldo
Do you have more information on this Tail of the Dragon weekend?
There is the beginning of the 10 page thread, it has all the info you need. If you like fast, fun driving, the mountains, cars, good people, and some drinks in the evening, you will have the time of your life
Originally Posted by BoilerUpXFire
The black makes it stick out more, it did on my last one.
I have rebent the grille slightly - to get more arc and set it back a little more for depth, shortened the tabs to accomodate the recessed grille, and bent them a little till I could use the mounting points.
On the bottom I used zip ties for a few months, tieing the bottom of the grill through the small 'lip' on the bumper cover at the rear, and over time, it ended up contouring the grille and bumper cover to look a lot better, I cut the zip ties weeks ago, but the change is permanent.
As I said, a lot of 'massaging'
I have rebent the grille slightly - to get more arc and set it back a little more for depth, shortened the tabs to accomodate the recessed grille, and bent them a little till I could use the mounting points.
On the bottom I used zip ties for a few months, tieing the bottom of the grill through the small 'lip' on the bumper cover at the rear, and over time, it ended up contouring the grille and bumper cover to look a lot better, I cut the zip ties weeks ago, but the change is permanent.
As I said, a lot of 'massaging'
Last edited by FP; Sep 8, 2011 at 08:14 PM.
Originally Posted by FP
My updated 2011 pictures. Black Crossfires ROCK....




And P.S. where did you get those slasher stripes! Those colors would work well with my car I think.
Last edited by FP; Sep 8, 2011 at 08:16 PM.
Originally Posted by Erichenderson02
Is that magnaflow exhaust? I like how your tips sit up high like the OEM ones did. I have the Megan Racing muffler and it sits kind of low D:
And P.S. where did you get those slasher stripes! Those colors would work well with my car I think.
And P.S. where did you get those slasher stripes! Those colors would work well with my car I think.
Thanks, Her's a close-up of the stripes.
Last edited by FP; Aug 31, 2011 at 10:52 AM.
Those wheels are growing on me FP...since I will be up all night in the parking lot keeping my eye on my car, I might have time to do a wheel swap...lol....
Originally Posted by oledoc2u
Those wheels are growing on me FP...since I will be up all night in the parking lot keeping my eye on my car, I might have time to do a wheel swap...lol....
Last edited by FP; Aug 31, 2011 at 10:52 AM.





