Did you take them off or paint them on the car....? I need to paint mine too .

 

Off the car. I got a spare set from a local wreck. I should have spent more time on prep...every little rock chip showed up. I don't think I'd attempt it with them still on the car especially since it's pretty easy to get them off. I think we'll call this first attempt "practice".

 

I had a couple E55 superchargers setting around, so I decided to steal one of the badges for my SRT.

Damn, why are my photos so damn big!

IMG_20130609_165749_876_zpsf7a913b8.jpg

IMG_20130609_165744_437_zpsbf96dec7.jpg

 

We really need a forum tool that automatically fits pics into the "Goldilocks" zone for threads....not too big, not too small. When I used the built-in tool to link to pics in my user gallery they're way too small.

 

I put my car on Cars.com,, as I was ask would I sell it ,the answer is yes ,if the price is right.

 

Removed seats and door panels to be re-upholstered. Dynamat on the doors while panels are off Might dynamat the floor and rear carpet area (bulkhead) while everything is out.

 

I like em big! Lots of detail!

 

Installed 74mm TB
Sprint booster
And new EuroTune...
Couldnt take it for a drive because wasnt getting responce from gas pedal...thinking its a vaccum line fitting not properly sealed...hopefully nothing major and get to test out the new upgrades tomorrow

 

Keyless entry alert tone

Did this today - took about 15.min. I used Radio Shack 275-0060 - tone isn't bad but it could be louder even when mounted outside the fuse box - sound level on this on is 86db.

Has anyone tried a different one from Radio Shack that is louder?


Just a note that I had to reset the disabling of the seat belt chime after doing this mod!

 

I wish you'd done that 6 months ago when I was in the market for one. I just did a search on cars.com, and I couldn't locate it.

 

No throttle response is probably because of the sprint booster.
Might not be plugged in correctly.
As I recall it can be plugged in 2 ways but only one way will work.

 

I'm still waiting for my S/C to I/C gasket so I cleaned the valley under the I/C, decided to reseal the drivers side upper valve cover etc. Now, where to find the baked potato material.

Les

 

Yes I looked around here saw it can be put on 2 ways....I changed it..IT WORKS...
VERY AWESOME TOO

 

See that thread on this.. 95DB from Radio shack on mine.

 

You can get the wiper nut caps from Rob at Needswings ......

 

Nothing, it's raining again.

 

Yeah... just snapped that pic today and noticed that when I pulled it up on my phone to post..

 

Within the last week, I tore the entire front end off the car and did some refinishing. I removed the 7 layers of tinted clear we sprayed them with 3 years ago (starting to look tired, and a few rock chips). We resprayed them a little lighter, they turned out well. I detailed everything while I had it apart.

I got it all buttoned up for a 600+ entry car show this weekend and ended up taking first place in 'Midsize Mopar All'. Previously, I have also taken a first and second place at the show. There were some pretty serious cars out there, and a ended up beating a custom 300 with air ride, custom wheels, stereo, etc. so I was happy

 

Good job John, keep up the good work.

PitMarshall and I entered a car show, visitors voted in several categories, we won nothing as expected. But we were lucky in the door prizes, PitMarshall won a $100 gas card and I won a Magellan GPS 3030. Not super prizes but we made out like bandits compared to many.

v2addict entered his custom bobber but failed to get a prize although it was the best custom bike there as far as I was concerned. He did not win a door prize either.
Some trashy chromed up HD won, all glitz, no glam - no taste.

 

Full size photos, I like that, can you put one up of your car?