So I recently acquired a 2004 crossfire with around 50 thousand miles but it had the rcm starting issue or so that's what i thought, so I soldered the board and changed the fuel pump yet the car will not turn over and then there is no fuel pressure when I check the small nipple under the hood.
Any suggestions of what it could be? Fuel injectors maybe, but those usually don't just die. The car ran fine for about 10 miles from the place i bought it then the engine stopped, any suggestions?

 

no start and no fuel =rcm find someone close try their rcm or buy a new one,, or you could just send yours to tighted with $30 and he will fix it right...i know a lot of us including myself have soldered and then sent it to him when it got back it worked.

 

Who's this tighted? and what would i send to him?

 

go to tsb and how to
any way here is what he saidCost for rebuild is $30



If you are interested, here's the deal.
I will inspect, redo bad solder joints, perform the Me So Horny mod (horn works w/o key) and replace the Air Pump relay (and the Fuel Pump relay if needed). I will then test your RCM in one of my cars. Then I will mail back the RCM to you via USPS Priority Mail (2-3 day). In most cases I get the RCM back in the mail the day after I receive it so yer looking at about a week total. If you send it "Signature Required" return will be longer as I have to go into town to pick up the package. If you want the package insured please include an additional $5.
Please email your address to me also.
Leave all fuses and plastic cover on RCM.
* Please detail any issues you may be having (no start, cooling fan runs FAST, wing stays up, whatever).

Send your RCM and $30 to:

TIGHED1
3601 Pinnacle Ct
Sierra Vista, AZ 85650

__________________

 

Thanks for the info