V8, keep up with my mods
V8, keep up with my mods
modding my V8 crossfire, and making test at the track after each mod,,, so far it is V8 engine and Rudy's built transmission . As most know i ran 11.78 in stock form ,,V8 with stock intake with K&N filters,,
pic here for now
https://www.crossfireforum.org/forum...-2016-228-.jpg
1. next will be 2.5 down pipes from engine, no cats to 3" exhaust will have a 3" flow through thrush muffler in the middle( to reduce the noise),, to my SRT 6 muffler.
2. and maybe Needswings super-cooler before next run.
pic here for now
https://www.crossfireforum.org/forum...-2016-228-.jpg
1. next will be 2.5 down pipes from engine, no cats to 3" exhaust will have a 3" flow through thrush muffler in the middle( to reduce the noise),, to my SRT 6 muffler.
2. and maybe Needswings super-cooler before next run.
Re: V8, keep up with my mods
Hay Les, just fixing the car ,,lowering and moving forward the lower radiator support, for extra cooling ,,,and making the upper support ,,so i can change pulleys and radiator faster , you know with the v8 the engine is more forward so need to fix that, re balance the car, add brakes ect.. when i get through the car will be a 10 second daily driver LOL How is your car doing,,, i know you had it rough after the storm. lets go to the track!!! jim
Re: V8, keep up with my mods
I have a fan from a C something i think it was a 300 and trimmed down to make it fit and hooked up- stock so far it has not run full blast and it was 89 yesterday, 1 needle width past 1/2 way is as high as it goes, stock thermostat.
.
.
Re: V8, keep up with my mods
modding my V8 crossfire, and making test at the track after each mod,,, so far it is V8 engine and Rudy's built transmission . As most know i ran 11.78 in stock form ,,V8 with stock intake with K&N filters,,
pic here for now
https://www.crossfireforum.org/forum...-2016-228-.jpg
1. next will be 2.5 down pipes from engine, no cats to 3" exhaust will have a 3" flow through thrush muffler in the middle( to reduce the noise),, to my SRT 6 muffler.
2. and maybe Needswings super-cooler before next run.
pic here for now
https://www.crossfireforum.org/forum...-2016-228-.jpg
1. next will be 2.5 down pipes from engine, no cats to 3" exhaust will have a 3" flow through thrush muffler in the middle( to reduce the noise),, to my SRT 6 muffler.
2. and maybe Needswings super-cooler before next run.
Last edited by JEFASOLD; 05-28-2019 at 04:51 PM.
Re: V8, keep up with my mods
lowered the radiator support 3" and moved froward 3" modded fan from a mercedes car, set up on stock temp setings, the fan has never gone full speed, we did cut down the fan to fit into the crossfire. Needswings supercooler and small water tank in place of air pump, located high as the engine, fuel pump from mercedes with a adjustable regulator set at 65 psi,with vac hose to maintain 65 psi through out boost range.
I have a sound bite of the exhaust as soon as i can get it to post, tried earlier with no luck.
Re: V8, keep up with my mods
that ks what i was telling you about i just forgot to say that the two fans were removed and i replaced them with one big with more cfm ,,from the mercedes C class and had to mod it so it would fit.
Re: V8, keep up with my mods
As most know i ran 11.78 in stock form ,,V8 with stock intake with K&N filters,,
Went to Orlando speedway last night could not get traction. best run was
12.00 @ 115 and 12.20 @ 117 lots of spinning 13.2 @ 115 the exhaust increase the low end torque so the car is faster but need radials,
Went to Orlando speedway last night could not get traction. best run was
12.00 @ 115 and 12.20 @ 117 lots of spinning 13.2 @ 115 the exhaust increase the low end torque so the car is faster but need radials,