I just got the bluetooth kit from becker, and I've been wondering if there would be a way to manipulate the kit to use the phone input as an aux input. I haven't had much time to experiment, but my thoughts are the phone is activated by the car kit sending a signal to the headset via the signal wire included in the kit. Once this is signal hits the deck it mutes what you are listening to and takes the audio from your wireless kit to play through the speakers. Since the bluetooth kit uses a mono rca connection the best one could hope to achieve would be a mono connection. Unless that is... some how you could use the stereo connection in place of the mono connector. Just a thought, which im sure has crossed someone else's path a long the way... I'd appreciate anyone's input...

 

Do you have any pictures of what you are talking about? I was thinking about putting a blue tooth device myself.

 

Same here...

 

I won't be able to post pictures until this weekend (i'm out of town). But my question was more geared towards using the phone adapter kit from becker as an aux input for an mp3 player... I hope this helps clarify what I was hoping to achieve...

 

here is the wiring information files and how to turn it on https://www.crossfireforum.org/forum...ad.php?t=18246 goto post #8. I can't upload the radio manual it's too big, it tells you how to turn on the cell phone input in your owners manual.

 

Here's the back panel pin-out. The kit for the phone from Becker is mono and the head unit is set up to select which speaker the signal will come out. It's not going to do stereo. And the signal isn't going through the head unit so you don't have any control of the sound. It looked like a good idea but I chased it and it's a dead end, unfortunately...