Audio, Video and Electronics Have audio, video or electronics questions? Post them in here.

From Prototype to Production...

Thread Tools
 
Old Feb 16, 2009 | 08:31 PM
  #21 (permalink)  
ppro's Avatar
Thread Starter
|
Forum Regular
Joined: Sep 2007
Posts: 963
Likes: 2
Default Re: From Prototype to Production...

Sorted through my write-up and organized it and cut it into five pages...

Cheers!
 

Last edited by ppro; Feb 17, 2009 at 06:04 AM.
Reply
Old Feb 16, 2009 | 09:43 PM
  #22 (permalink)  
sonoronos's Avatar
Senior Member
Joined: Dec 2007
Posts: 2,060
Likes: 2
From: Fairfax, VA
Default Re: From Prototype to Production...

great writeup, ppro
 
Reply
Old Feb 17, 2009 | 09:36 PM
  #23 (permalink)  
ppro's Avatar
Thread Starter
|
Forum Regular
Joined: Sep 2007
Posts: 963
Likes: 2
Default Re: From Prototype to Production...

I added the rear-camera this evening. Quicker than a car wash!



Started another thread here
 
Reply
Old Apr 6, 2009 | 09:25 PM
  #24 (permalink)  
ppro's Avatar
Thread Starter
|
Forum Regular
Joined: Sep 2007
Posts: 963
Likes: 2
Default Re: From Prototype to Production...

It's been a couple months and a few thousand miles. Tonight I captured the statistics from the unit. These are the measures and historical highs for each category.

Must have slipped on the RPM there - a bit high
Power and Torque in line with expectations at the limits
Acceleration G's (Forward) - I'm not much for fast take-offs so this is no surprise.
Acceleration G's (Reverse) - I distinctly recall this one - a deer jumped in front of me and I put the pedal to the floor. The car stuck like it was glued.
Lateral G (L) - There's a nice sweeper near the house, This number is just shy of what C&D got in their tests. This was with the Eagle F1's



I don't remember the Lateral G (R) but that's a decent number
The Lat's and Lon's are just local places - the farthest N/S/E/W traveled lately. My extremes are considerably more in every direction. GPS map users can have some fun figuring out where these places are...
There are lots of incredibly steep hills out here. These Slope numbers are on a nose-bleed street in town.




The Angle V (L & R) are degrees per second and correspond to fast moves through sharp corners.



As more time goes by the Learning Status has slowly shown a longer progress bar for the various measures. Plenty of speed pulses, and nearly maxed out for distance and 3D learning.

 
Reply
Old Apr 6, 2009 | 09:59 PM
  #25 (permalink)  
JimmySkullz's Avatar
Senior Member
Joined: Oct 2008
Posts: 923
Likes: 11
From: Folsom Prison
Default Re: From Prototype to Production...

very Cool... I never installed mine, I ended up selling it..
 
Reply
Old Apr 6, 2009 | 11:01 PM
  #26 (permalink)  
faiz23's Avatar
Forum Regular
Joined: Nov 2008
Posts: 610
Likes: 1
Default Re: From Prototype to Production...

yours HP looks right at 170 ish but what about your torque is that show 300lbs
 
Reply
Old Apr 7, 2009 | 05:01 AM
  #27 (permalink)  
ppro's Avatar
Thread Starter
|
Forum Regular
Joined: Sep 2007
Posts: 963
Likes: 2
Default Re: From Prototype to Production...

Originally Posted by faiz23
yours HP looks right at 170 ish but what about your torque is that show 300lbs
I do wonder about that. The "official" spec is what - 279ft-lbs? Given that this is deriving some of these measures, and that reading was early in the "learning" period, it was probably derived in error.

I still have to catch a scale open so I can weight the car to get the actual weight for my car as built. Until then I am using the factory weight, which means some of the other calcs could be a little bit off.
 
Reply
Old Apr 7, 2009 | 06:40 AM
  #28 (permalink)  
sonoronos's Avatar
Senior Member
Joined: Dec 2007
Posts: 2,060
Likes: 2
From: Fairfax, VA
Default Re: From Prototype to Production...

Looks great ppro!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NeedsWings
Engine, Exhaust, Transmission and Differential
70
Mar 24, 2023 09:48 AM
NeedsWings
Engine, Exhaust, Transmission and Differential
26
Nov 29, 2016 12:03 PM
amx1397
Troubleshooting & Technical Questions & Modifications
9
Mar 2, 2013 12:21 AM
Skyshadow
Other Cars Etc
6
Mar 17, 2009 01:07 PM
ppro
Exterior & Lighting
7
Jun 5, 2008 07:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 08:22 PM.