Help with OEM AMP speed sensor
Thread Starter
|
Senior Member
Joined: Apr 2006
Posts: 1,085
Likes: 4
From: Grass Lake, MI.
Help with OEM AMP speed sensor
I have a aftermarket head-unit and would like to disable the OEM AMP speed sensor. Could anyone advise me on how to do this. I'm guessing I can cut one of the wires leading into the amp but need help on which color and location on the connector.
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: Help with OEM AMP speed sensor
According to the schematic, it would the the dark green/white wire on pin 3 of the 'B' connector.
( the 'B' connector is the one with all the speaker wires, the 'A' connector comes from the head unit ) )
BUT DON'T BLAME ME IF THIS IS INCORRECT, THE SCHEMATICS ARE OFTEN INCORRECT
Hook a DC voltage meter to it and drive, see if it changes with speed ........
( the 'B' connector is the one with all the speaker wires, the 'A' connector comes from the head unit ) )
BUT DON'T BLAME ME IF THIS IS INCORRECT, THE SCHEMATICS ARE OFTEN INCORRECT
Hook a DC voltage meter to it and drive, see if it changes with speed ........
Joined: May 2008
Posts: 234
Likes: 0
Re: Help with OEM AMP speed sensor
Thread
Thread Starter
Forum
Replies
Last Post
pioneer4x4
Audio, Video and Electronics
0
Jul 27, 2015 02:04 PM
xfireon20z
Parts/Accessories for sale - Archive
3
Jul 20, 2015 04:35 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
