Cruise Control

Reply Subscribe

Thread Tools

Oct 20, 2008 | 06:06 AM

#1 (permalink)

tayabchinyoty

Thread Starter

Joined: Sep 2008

Posts: 35

Likes: 0

From: Melbourne, Australia

Cruise Control

Hey,
I have a 2003 crossfire coupe.
I changed the rims and the cruise control quit on me.
Please advise what to do.

Oct 20, 2008 | 06:31 AM

#2 (permalink)

itsky

Senior Member

Joined: Feb 2008

Posts: 4,084

Likes: 4

From: Tennessee

Re: Cruise Control

That must be an ULTRA RARE Crossfire being a 2003 model.

Oct 20, 2008 | 07:32 AM

#3 (permalink)

kingkub57

Forum Regular

Joined: Jun 2006

Posts: 453

Likes: 1

From: St. Clair Shores Michigan

Re: Cruise Control

did you install the tire pressure monitors ??? did you have them recalibrated to the car ??? did you damage any of the wheel speed sensors or wiring ??? just some thoughts, but are you sure its a 2003 ???? and the car stock comes with 18 in front and 19 in back since you changed the size the cruise controll might not be picking up the right signals from over sized rims and may need recalibration if that is even an option not sure ???

Last edited by kingkub57; Oct 20, 2008 at 07:38 AM.

Mar 25, 2009 | 04:50 PM

#4 (permalink)

all_Bran

Joined: Sep 2007

Posts: 104

Likes: 0

Re: Cruise Control

I currently have my winter wheels on the car which do NOT have TPS sensors. I also can't set my cruise control. Is this normal?? Do I need to reinstall the factory wheels with TPS's so the cruise will work? If so, THAT IS F*CKING DUMB!