Crossfire Coupe A place to discuss Coupe specific topics.
Sponsored by:
Sponsored by: CARiD

headlight aim

Thread Tools
 
Old Feb 22, 2005 | 05:13 PM
  #1 (permalink)  
Rick Woodell's Avatar
Thread Starter
Joined: Sep 2004
Posts: 27
Likes: 0
Default headlight aim

Hi guys! I knew my left (low beam) headlight aim was off, but this morning in a dense fog, I could clearly see that it is shining up and to the right. I see how to correct the up and down, but am yet to figure out how to correct the left/right aim. It's pretty bad. It isn't until you get in actual road conditions that it is apparent.
Any help will be appreciated.
Rick
 
Reply
Old Feb 22, 2005 | 06:59 PM
  #2 (permalink)  
saldous's Avatar
Forum Regular
Joined: Jun 2004
Posts: 790
Likes: 0
From: Berkshire, UK
Default Re: headlight aim

Get your dealer to fix it.
 
Reply
Old Feb 23, 2005 | 11:19 AM
  #3 (permalink)  
NJspeed69's Avatar
Forum Regular
Joined: Jan 2004
Posts: 459
Likes: 1
From: New Jersey and New York
Default Re: headlight aim

Theres a couple of screws you can access easily to move it a little bit, then just tighten them up.
 
Reply
Old Feb 23, 2005 | 01:32 PM
  #4 (permalink)  
hunt416's Avatar
Joined: Sep 2004
Posts: 83
Likes: 0
From: Burnaby, BC
Default Re: headlight aim

The manual has a fairly good description of how to do this (pg 216). There is a "rear headlight cover" that needs to be removed in order to gain access to the aiming screws.
 
Reply
Old Feb 23, 2005 | 02:42 PM
  #5 (permalink)  
JackInMidtown's Avatar
Joined: Jul 2004
Posts: 25
Likes: 1
From: Memphis, TN
Default Re: headlight aim

It also may be nothing more than the bulb is not properly seated. If it is not, then the aim will appear off. If you put aftermarket bulbs in, that may be your problem.
 
Reply
Old Feb 23, 2005 | 06:31 PM
  #6 (permalink)  
Rick Woodell's Avatar
Thread Starter
Joined: Sep 2004
Posts: 27
Likes: 0
Default Re: headlight aim

Thanks for the info. The dealership shone them on the wall (about 6 feet away) and said they were fine. DUH! I tried to explain its a distance thing. Anyway, I'll do it myself. Thanks again.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smfrycruzr
Exterior & Lighting
29
Jul 17, 2023 05:33 PM
srtmodder
Exterior & Lighting
13
Aug 23, 2017 08:28 PM
Franc Rauscher
Troubleshooting & Technical Questions & Modifications
14
May 9, 2016 12:04 PM
JEFASOLD
All Crossfires
2
Sep 28, 2015 12:10 PM
RacerXofFL
Cars For Sale - Archive
2
Sep 15, 2015 05:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 09:57 PM.